07-27-2017, 03:37 PM | #1 |
Senior Member
Join Date: Oct 2014
Location: capecod
Posts: 123
|
39 ford radio
does anyone know why when I press the roto-matic switch the dial does not rotate thanks tom
|
07-28-2017, 07:59 AM | #2 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: 39 ford radio
the switch is made to be serviceable, it pulls out of the speaker head. this will be easier with head out of dash. mine was not working and i cleaned and lubed linkage and got it going again. this is controlled by a small solenoid that could be shot.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-28-2017, 02:13 PM | #3 |
Senior Member
Join Date: Oct 2014
Location: capecod
Posts: 123
|
Re: 39 ford radio
thanks,do you know were the solenoid is located
|
07-29-2017, 07:32 AM | #4 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: 39 ford radio
it is inside the small metal "box" that contains the right station indicator. it pulls out from back. if you can't get it working, manually set station indicator to "dial" and you should be able to tune in stations.
|
07-29-2017, 12:59 PM | #5 |
Senior Member
Join Date: Oct 2014
Location: capecod
Posts: 123
|
Re: 39 ford radio
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|