|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-30-2019, 12:23 PM | #1 |
Member
Join Date: Sep 2016
Location: Manchester, Mich
Posts: 40
|
Installing Modern shocks
Quick question. When I install modern shocks on the rear of a Model A coupe, would there be any issues if I replace the two rear bolts (crown bolts) with standard bolts and reverse the directions and use lockwasher instead of castle nuts. I am having some problems finding crown bolts.
|
05-30-2019, 01:21 PM | #2 |
Senior Member
Join Date: Nov 2018
Location: Kankakee, Illinois
Posts: 225
|
Re: Installing Modern shocks
I have recently installed Modern rear shocks were they require using modern bolts in the reverse direction with lock washers. No problems yet. But you do want to check them regularly as you grease to be sure they remain tight.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-30-2019, 01:29 PM | #3 |
Senior Member
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
|
Re: Installing Modern shocks
If you're really concerned about nuts loosening off check this out.
https://www.nord-lock.com/en-us/nord-lock/ |
05-30-2019, 03:05 PM | #4 | |
BANNED
Join Date: Jan 2016
Location: newfoundland,canada
Posts: 128
|
Re: Installing Modern shocks
Quote:
|
|
05-30-2019, 03:11 PM | #5 |
Senior Member
|
Re: Installing Modern shocks
Use either a steel or fibre self locking nut, they work on airplanes so should be OK for our old Fords. Steel is usually use when there is heat involved.
|
05-30-2019, 04:12 PM | #6 |
Senior Member
Join Date: Aug 2015
Location: Clermont in Central Florida
Posts: 111
|
Re: Installing Modern shocks
Sponsored Links (Register now to hide all advertisements)
That is what I used to attach the brackets for Ken Davis shocks. You can check it out easily. Last edited by 5lugnuts; 05-31-2019 at 03:06 PM. |
05-30-2019, 04:26 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Installing Modern shocks
Quote:
Terry |
|
05-30-2019, 06:13 PM | #8 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: Installing Modern shocks
This is what I used on my Ken Davis shocks.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club Last edited by CarlG; 05-30-2019 at 06:20 PM. |
05-30-2019, 06:19 PM | #9 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: Installing Modern shocks
Duplicate please delete
Last edited by CarlG; 05-30-2019 at 06:24 PM. Reason: Duplicate |
05-30-2019, 06:39 PM | #10 | |
Senior Member
Join Date: Nov 2018
Location: Kankakee, Illinois
Posts: 225
|
Re: Installing Modern shocks
Quote:
https://www.ebay.com/itm/28-29-30-31...8AAOSw7NNT2FtZ |
|
05-30-2019, 08:13 PM | #11 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: Installing Modern shocks
Ken Davis, installed front and rear on my '31 town sedan, rides smoother then my 2012 jeep.
__________________
Keith Shawnee OK '31 SW 160-B |
05-31-2019, 04:35 AM | #12 |
BANNED
Join Date: Jan 2016
Location: newfoundland,canada
Posts: 128
|
Re: Installing Modern shocks
|
05-31-2019, 04:38 AM | #13 | |
BANNED
Join Date: Jan 2016
Location: newfoundland,canada
Posts: 128
|
Re: Installing Modern shocks
Quote:
|
|
05-31-2019, 08:02 AM | #14 |
Junior Member
Join Date: Feb 2012
Posts: 26
|
Re: Installing Modern shocks
I just installed 4 shocks from a well known Model A enthusiast Dick Pirkl. His shock kits directly install front and rear with no drilling or added brackets. They are very hefty and include lifetime warranty gas shocks.
Dick must keep them in stock as I received next day shipping. 4 shocks with front and rear brackets and shipping are about $350. I installed these after installing a Mitchell overdrive and it makes the Model A Roadster handle like a modern car. 4 working shocks are a must for touring cars. You can contact Dick here: Richard Pirkl email:[email protected] phone: 608-575-7433
__________________
/Users/RobertKensinger/Desktop/thumbnail_IMG_0296.jpg |
05-31-2019, 09:49 AM | #15 | |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: Installing Modern shocks
Quote:
|
|
05-31-2019, 06:13 PM | #16 |
Senior Member
Join Date: May 2014
Location: Santa Barbara, Ca
Posts: 329
|
Re: Installing Modern shocks
I just today finished install the shock kit from ebay mentioned above. I chose it because there was not drilling of the front axle. I have not driven it yet, waiting to get the grease seals for the drums.
The install was pretty straight forward, BUT I would suggest looking at/ printing the user instructions on the internet (search "www.apexinds.com"). The instructions that come with the kit are minimal, both together are pretty good. There are good tips and the visual helps in determining position of brackets, possible drilling of rear backing plate for new provided bolts. I found all the fit well, BUT the upper front bracket bolt holes were a little small due to powder coat build up... I just threaded to bolts through the holes to preserve the coating. Sorry for length of post. |
05-31-2019, 06:49 PM | #17 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: Installing Modern shocks
I have often wondered why PASSENGER CAR shocks are designed to mount upside down.
It is counter to the laws of physics. Race car shocks mount properly. (body up) |
05-31-2019, 07:10 PM | #18 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,339
|
Re: Installing Modern shocks
|
05-31-2019, 07:58 PM | #19 |
Junior Member
Join Date: Feb 2012
Posts: 26
|
Re: Installing Modern shocks
Dick Pirkl shocks are Monroe. Many members of the Model A Club in Madison WI have used these for many years without a problem.
__________________
/Users/RobertKensinger/Desktop/thumbnail_IMG_0296.jpg |
05-31-2019, 10:33 PM | #20 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: Installing Modern shocks
Mid 60's VW shocks (pure oil , no gas charge) would fit if you have eyelets on both ends. Some variants have one eyelet and link pin on the other end. The gas charged, Monroe, etc. are usually too stiff for an A.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|