Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-23-2021, 02:25 AM   #1
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default question from a young guy

Note Im not sure if this is allowed but its not a model t related question (it might be)




Now I'm Under 16 and my only source of cash is Christmas and birthday money
I know I'm not gonna be able to afford a model t for a looooooong time
But just wondering about the skill to make a Horseless carriage replica with a lawnmower engine (Note I'm not very mechanically skilled but my dad has loads of tools) I have two choices of what carriage to build! A olds dash replica and also a model t speedster replica (seems harder then the olds )
Just wondering if this is feasible and if any of ya guys have experienced what issues I might be running into and which is easier the olds or the tin lizzie
Youngfordlover2007 is offline   Reply With Quote
Old 08-23-2021, 02:25 AM   #2
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Mods if ya take this down i understand i wont be salty
Youngfordlover2007 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-23-2021, 04:38 AM   #3
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,781
Default Re: question from a young guy

first off- take a job- they are paying 18.00 an hour here in NJ-you can work at 14


yes, go with the olds....... they are frequently for sale on ebay for a few thou and easy to copy.


good luck!
ronn is offline   Reply With Quote
Old 08-23-2021, 02:20 PM   #4
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Quote:
Originally Posted by ronn View Post
first off- take a job- they are paying 18.00 an hour here in NJ-you can work at 14


yes, go with the olds....... they are frequently for sale on ebay for a few thou and easy to copy.


good luck!
Sadly I live in Canada and the minimum age to work is 14 and im 13 And i just live around farms they don't pay that much think (5 usd a hour) so im just waiting till my birthday
Youngfordlover2007 is offline   Reply With Quote
Old 08-23-2021, 09:18 PM   #5
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: question from a young guy

We’ve all been there. Dreams bigger than our pocket books.
McMimmcs is offline   Reply With Quote
Old 08-23-2021, 09:46 PM   #6
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by McMimmcs View Post
We’ve all been there. Dreams bigger than our pocket books.
some happy news is that since i enrolled in a metalworking class the teacher maybe could help me fab a chassis but school starts in September so right now im just saving up
Youngfordlover2007 is offline   Reply With Quote
Old 08-24-2021, 03:36 AM   #7
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: question from a young guy

Quote:
Originally Posted by Youngfordlover2007 View Post
some happy news is that since i enrolled in a metalworking class the teacher maybe could help me fab a chassis but school starts in September so right now im just saving up
Part time and summer jobs for students are easy to come by!
McMimmcs is offline   Reply With Quote
Old 08-24-2021, 06:06 AM   #8
mhsprecher
Senior Member
 
mhsprecher's Avatar
 
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,817
Default Re: question from a young guy

Good luck. Have fun!
__________________
1924 Model T Coupe
1928 Model A Roadster
1930 Model A Town Sedan
1939 Deluxe Fordor
1945 pickup
1951 Custom convertible
mhsprecher is offline   Reply With Quote
Old 08-24-2021, 07:47 AM   #9
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,781
Default Re: question from a young guy

https://content.invisioncic.com/r277...f44f71b6a0.png
ronn is offline   Reply With Quote
Old 08-24-2021, 07:48 AM   #10
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,781
Default Re: question from a young guy

so that one is in cali..................


rob a bank, talk to your folks or set up a gofundme page...............


you should be able to buy it for 2000.


not worth building one....... a nice project.
ask the seller to store till you can get it................


just an idea.
ronn is offline   Reply With Quote
Old 08-24-2021, 01:04 PM   #11
Two-Gun Bob
Junior Member
 
Join Date: Nov 2010
Posts: 17
Default Re: question from a young guy

Since you live in a rural area, ask the farmers if there are old vehicles in the fencerows that you can haul off (with your parents' permission of course!). You might be able to get an interesting project for free or make a trade to do some work in exchange. That's how I got my first Model T parts.
Two-Gun Bob is offline   Reply With Quote
Old 08-24-2021, 02:41 PM   #12
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Quote:
Originally Posted by Two-Gun Bob View Post
Since you live in a rural area, ask the farmers if there are old vehicles in the fencerows that you can haul off (with your parents' permission of course!). You might be able to get an interesting project for free or make a trade to do some work in exchange. That's how I got my first Model T parts.
parents wont allow it
Youngfordlover2007 is offline   Reply With Quote
Old 08-24-2021, 03:52 PM   #13
Ed in Maine
Senior Member
 
Join Date: May 2010
Location: Washington Cty., ME or Flagler Cty., FL
Posts: 1,106
Default Re: question from a young guy

Hello, we were all young once, oh those days long ago, I'm 79 now. My first car was a rust free, 1930 Model A Town Sedan which was all disassembled by the previous owner for $300.00. This was purchased in 1964. I was still in college with bills to pay and my Dad was ripped. But three years later this car took me and my new wife away from the church. We never looked back, have had Model A s ever since and now a 1914 Model T. You have to start some place, here are some suggestions:
1. Get some books on how to restore a Model T. Learn about them.
2. Try to join a Model T club nearby. The club members will be pleased with your interest and help you along. You will make new friends who will have the same interest as you. Best of all, they will know where Model T s are located.
3. Study classifieds on the internet. Don't be put off by some of the pricing you will see. There is a lot of Model T parts out there. All you need is a frame to start hanging parts on.
4. If you find something to get started with, you may be able to get your Dad to go look at it. It is a great way to spend time with your Mom or Dad.

Good luck to you. By the way there is a Model T section on the Ford Barn, check in and let them know your interest. Ed
Ed in Maine is offline   Reply With Quote
Old 08-24-2021, 05:43 PM   #14
Two-Gun Bob
Junior Member
 
Join Date: Nov 2010
Posts: 17
Default Re: question from a young guy

In that case you might just focus on saving up money and use your upcoming class to gain skills that will be helpful when you are able to get a project. The curved-dash Olds project would be a good practice run for an actual antique car, T or otherwise.
Two-Gun Bob is offline   Reply With Quote
Old 08-25-2021, 01:23 AM   #15
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Quote:
Originally Posted by Two-Gun Bob View Post
In that case you might just focus on saving up money and use your upcoming class to gain skills that will be helpful when you are able to get a project. The curved-dash Olds project would be a good practice run for an actual antique car, T or otherwise.
yea will do
Youngfordlover2007 is offline   Reply With Quote
Old 08-26-2021, 10:38 AM   #16
RAJO special
Junior Member
 
Join Date: Aug 2010
Posts: 17
Default Re: question from a young guy

Just be patient. Get involved with a local group, you would be surprised what may turn up.
I would suggest building a T, something between 17-25 parts are cheap and easily available. Once you have a running chassis you shouldn't ever have to take a loss. Building a reproduction can be rewarding, but others may not see the value.
Good Luck,
Kevin
RAJO special is offline   Reply With Quote
Old 08-26-2021, 05:16 PM   #17
15max
Senior Member
 
Join Date: Nov 2012
Posts: 327
Default Re: question from a young guy

Go for it. There is a lot of info on the net. What ever you built will add to you skills and interest. That is a fantastic place for your mind to be.
Glad to see your interest.
15max is offline   Reply With Quote
Old 08-26-2021, 08:43 PM   #18
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Quote:
Originally Posted by RAJO special View Post
Just be patient. Get involved with a local group, you would be surprised what may turn up.
I would suggest building a T, something between 17-25 parts are cheap and easily available. Once you have a running chassis you shouldn't ever have to take a loss. Building a reproduction can be rewarding, but others may not see the value.
Good Luck,
Kevin
Thanks for the advice
Youngfordlover2007 is offline   Reply With Quote
Old 08-27-2021, 06:48 AM   #19
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,781
Default Re: question from a young guy

on another note- join MAFCA


they offer scholarships for writing about your exploits with a T. That scholarship can go a long way to your first T or olds or..............


maybe write about your search.
ronn is offline   Reply With Quote
Old 08-27-2021, 05:33 PM   #20
Youngfordlover2007
Member
 
Join Date: Jul 2021
Location: Canada
Posts: 50
Default Re: question from a young guy

Quote:
Originally Posted by ronn View Post
on another note- join MAFCA


they offer scholarships for writing about your exploits with a T. That scholarship can go a long way to your first T or olds or..............


maybe write about your search.
Honestly I'm not good at writing or math or any school stuff ill try but i doubt ill get accepted
Youngfordlover2007 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:16 AM.