The Ford Barn

Harold Degand · 05-29-2021, 03:39 PM

Looking for a pair of rear brake lever. NOS or good condition.

Thanks

DavidG · 05-30-2021, 04:53 PM

Sponsored Links (Register now to hide all advertisements)

The two outer levers in your photo are the same as originally used in North America with a single cross shaft/two rear brake rod set up. The lever in the center of your photo was part of the two cross shafts/four rear brake rod set up used only in select countries outside of North America where separate hand brake operation of the rear brakes was required. I recommend Michael Driskell (thirdgenauto.com and 35fordtn here on the barn) for the two North American levers (and perhaps that in the center of your photo).

05-30-2021, 04:53 PM	#2
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,102	Re: 1932 Ford rear brake lever Sponsored Links (Register now to hide all advertisements) The two outer levers in your photo are the same as originally used in North America with a single cross shaft/two rear brake rod set up. The lever in the center of your photo was part of the two cross shafts/four rear brake rod set up used only in select countries outside of North America where separate hand brake operation of the rear brakes was required. I recommend Michael Driskell (thirdgenauto.com and 35fordtn here on the barn) for the two North American levers (and perhaps that in the center of your photo).