The Ford Barn

40-A Twins · 03-30-2021, 04:10 PM

I folded the top irons down and they hit the wood side tack rail.
Can someone take a measurement from the door jamb to the forward end of the tack rail. Should I trim these a little bit narrower too ?
Kevin

BRENT in 10-uh-C · 03-31-2021, 08:01 AM

Sponsored Links (Register now to hide all advertisements)

Where your red line is located will be about 11.250". Between the Top Iron tabs is 48.500". It is very possible your Top Bows are too short which will cause the entire assembly to be too narrow.

03-31-2021, 08:01 AM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,520	Re: 28-29 Roadster tack rail Sponsored Links (Register now to hide all advertisements) Where your red line is located will be about 11.250". Between the Top Iron tabs is 48.500". It is very possible your Top Bows are too short which will cause the entire assembly to be too narrow. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .