|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-04-2017, 09:14 PM | #1 |
Member
Join Date: Sep 2010
Posts: 46
|
Unfamiliar bell housing
Found this mixed in with my Model A parts and don't know what car it fits? Appreciate your help. Thanks.
Bob |
03-04-2017, 09:31 PM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Unfamiliar bell housing
1932 BB truck with 4 speed transmission.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-04-2017, 09:33 PM | #3 |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: Unfamiliar bell housing
I first thought it was an AA, but on closer inspection I don't think it is..........
It has an interesting grease cup on the access hole cover....
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 Last edited by 1955cj5; 03-04-2017 at 10:01 PM. |
03-04-2017, 09:38 PM | #4 |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: Unfamiliar bell housing
Is it a BB because of the different clutch arm?
Now I see other differences too.....the engine mounting holes are different
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 Last edited by 1955cj5; 03-04-2017 at 10:02 PM. |
03-05-2017, 06:34 AM | #5 |
Senior Member
Join Date: Feb 2011
Location: Wonderful Whitby Ontario
Posts: 131
|
Re: Unfamiliar bell housing
Hay, is the round thing on top this gadget I posted yesterday??
http://www.fordbarn.com/forum/showthread.php?t=216040 |
03-05-2017, 07:50 AM | #6 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Unfamiliar bell housing
Sponsored Links (Register now to hide all advertisements)
|
03-05-2017, 09:31 AM | #7 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Unfamiliar bell housing
Where is the "cup" for the front wishbone ball? It does not show on the underside.
|
03-05-2017, 09:42 AM | #8 |
Senior Member
Join Date: Aug 2014
Location: Southwick, MA
Posts: 590
|
Re: Unfamiliar bell housing
Model B's and BB's didn't have the front radius rod attached to the bellhousing.
|
03-05-2017, 01:22 PM | #9 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Unfamiliar bell housing
larn sumpin new everda. On the B or BB where was the radias rod attached?
|
03-05-2017, 09:16 PM | #10 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Unfamiliar bell housing
To the frame X member, which the model A did not have. From 32 to 48 the radius rod attached to the X member.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|