Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-31-2017, 03:34 PM   #1
oldredford
Senior Member
 
Join Date: May 2010
Location: Moncks Corner, SC
Posts: 439
Default Insert bearings

The last 2 Model A engines that I had inserted the rear main bearing failed due to lack of lubrication. The bearing spun cutting the oil flow. The insert shell actually welded onto the crank journal. A big mess. Has this happened to you? The first engine the bearing failed at 1000 miles and the second engine the bearing failed after 10 minutes of running in the garage. I believe inserts are not designed with a gravity flow oil system. Why is it the center main and forward main not effected? Now the first engine has been repaired with new inserts and this engine is running fine for the past 2 thousand miles. The second engine is being repaired, so I will have to wait the outcome.

Last edited by oldredford; 02-02-2017 at 05:09 AM.
oldredford is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:18 AM.