![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Levelland, Tx
Posts: 418
|
![]()
just discovered no volts to light switch ; replaced fuse to light switch .
no lights head, tail , or parking, no smoke engine starts and runs. what do you suggest I should check ? thanks fordman |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2014
Location: MA
Posts: 886
|
![]()
Volt meter and trace back to see where you do have volts.
__________________
Thanks - 30-9 1939, 1940 |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Nov 2012
Location: Wichita KS
Posts: 15,607
|
![]()
Did you check the fuse or just replace it? Was it blown?
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Levelland, Tx
Posts: 418
|
![]()
yep. the fuse was blown so I replaced it.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 2,384
|
![]()
Didn't know a 40 had a fuse.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Nov 2012
Location: Wichita KS
Posts: 15,607
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Levelland, Tx
Posts: 418
|
![]()
could find original light switch that looked original so I replaced with switch that had a built-in fuse that I installed under dash .
fordman, "kinda" |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Nov 2012
Location: Wichita KS
Posts: 15,607
|
![]()
Then have you checked the CB to see if you have power out to the lighting switch?
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|