The Ford Barn

CSArno · 03-11-2016, 09:57 AM

How much should the springs be tightened in a drag link? Thanks, Chris

12cliff23 · 03-11-2016, 05:59 PM

just put mine back together, the book I have on the 50 f1 says / fully compress the spring and back the adj. screw back to the coter pin hole/
bope this helps
clliff

CSArno · 03-11-2016, 07:49 PM

Sponsored Links (Register now to hide all advertisements)

Huh, that's pretty much what I did. Just seems kinda tight. Of course it probably would with rebuilt steering box, new king pins, bushings, and tie rod ends...
Thanks Cliff.

03-11-2016, 09:57 AM	#1
CSArno Senior Member Join Date: Feb 2015 Location: Maine Posts: 378	'49 Drag link How much should the springs be tightened in a drag link? Thanks, Chris

03-11-2016, 05:59 PM	#2
12cliff23 Member Join Date: Aug 2014 Location: western indiana Posts: 96	Re: '49 Drag link just put mine back together, the book I have on the 50 f1 says / fully compress the spring and back the adj. screw back to the coter pin hole/ bope this helps clliff

03-11-2016, 07:49 PM	#3
CSArno Senior Member Join Date: Feb 2015 Location: Maine Posts: 378	Re: '49 Drag link Sponsored Links (Register now to hide all advertisements) Huh, that's pretty much what I did. Just seems kinda tight. Of course it probably would with rebuilt steering box, new king pins, bushings, and tie rod ends... Thanks Cliff.