The Ford Barn

Joe777 · 08-02-2022, 06:02 PM

I could use some guidance on swapping the 4 blade fan for the 6 blade on my truck with the v8 engine. Would there be enough room to wiggle the fan out after removing the genny? Also, should I use some blue loctitie on the bolts that hold the fan to the hub? Thanks for any guidance offered.

cas3 · 08-02-2022, 11:25 PM

I have no ton ana half, but if you remove the fan bolts first, then the gennie I cant see why it would not come out. As for loctitie, , I actually think the opposite. With the proper ford bolts and lock washers, I would put a drop of oil on each bolt because I may be the poor bastard that has to remove it some day. Pa. is about the same swamp I live in and I have squirt oil cans all over the shop so every bolt gets ONE drop of oil, even on my modern junk

Joe777 · 08-03-2022, 07:42 AM

Sponsored Links (Register now to hide all advertisements)

I’ll remove the genny and give it a try. Not looking forward to laying over the fenders and lifting that thing out.

08-02-2022, 06:02 PM	#1
Joe777 Senior Member Join Date: Feb 2014 Location: W.Pa Posts: 103	46 1.5 ton fan replacement I could use some guidance on swapping the 4 blade fan for the 6 blade on my truck with the v8 engine. Would there be enough room to wiggle the fan out after removing the genny? Also, should I use some blue loctitie on the bolts that hold the fan to the hub? Thanks for any guidance offered.

08-02-2022, 11:25 PM	#2
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,588	Re: 46 1.5 ton fan replacement I have no ton ana half, but if you remove the fan bolts first, then the gennie I cant see why it would not come out. As for loctitie, , I actually think the opposite. With the proper ford bolts and lock washers, I would put a drop of oil on each bolt because I may be the poor bastard that has to remove it some day. Pa. is about the same swamp I live in and I have squirt oil cans all over the shop so every bolt gets ONE drop of oil, even on my modern junk

08-03-2022, 07:42 AM	#3
Joe777 Senior Member Join Date: Feb 2014 Location: W.Pa Posts: 103	Re: 46 1.5 ton fan replacement Sponsored Links (Register now to hide all advertisements) I’ll remove the genny and give it a try. Not looking forward to laying over the fenders and lifting that thing out.