|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-31-2020, 07:54 PM | #41 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,823
|
Re: Troubleshooting advice
Spark, valves, or gas!
Don’t start taking things apart. Try the MMO. Has helped solve a lot of engine problems with stored engines. Enjoy. |
01-01-2021, 08:31 AM | #42 |
Member
Join Date: Jul 2010
Location: Perth Hills Western Australia
Posts: 58
|
Re: Troubleshooting advice
When there is clearance in #4 valves, what is the clearance?
Is there any? |
Sponsored Links (Register now to hide all advertisements) |
|
01-02-2021, 12:31 PM | #43 |
Member
Join Date: Feb 2019
Location: Estes park Colorado
Posts: 53
|
Re: Troubleshooting advice
|
01-02-2021, 12:33 PM | #44 |
Member
Join Date: Feb 2019
Location: Estes park Colorado
Posts: 53
|
Re: Troubleshooting advice
I think I have a fuel flow problem....fuel was just a small trickle. gas tank still has some junk in it and is plugging up the shut off valve. Going to flush it out better and get some more of the rust out. then get one of the filters that sticks up from the shut off valve into the tank.
Last edited by Dewshan; 01-02-2021 at 12:41 PM. Reason: clarity |
01-02-2021, 08:16 PM | #45 |
Senior Member
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,909
|
Re: Troubleshooting advice
Probably be a good time to open up the carb for a look see while you are waiting on the pencil filter to arrive.
__________________
Dave / Lincoln Nebraska |
|
|
Sponsored Links (Register now to hide all advertisements) |
|