|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-11-2022, 02:41 PM | #1 |
Senior Member
Join Date: May 2010
Location: Forest Park, IL
Posts: 590
|
1946 Mercury Convertible Top Alignment
Does anyone know if there are ways to adjust the top on a '46 Mercury convertible? It went up and down fine before the material was applied, and now with the material on, the passenger side seems to touch and bind up when going up or down.
__________________
Obsessed with all things 1936 Ford since birth... thanks Dad. |
10-11-2022, 07:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Saratoga Springs, NY
Posts: 1,111
|
Re: 1946 Mercury Convertible Top Alignment
There is 4 eccentrics on each side that are used for adjusting the rails, also the front plates that bolt to the front wood bow have longated slots for a little adjustment & finally where the top frame bolts to the body there is also a little adjustment there but very hard after canvas is on.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-14-2022, 10:42 AM | #3 |
Senior Member
Join Date: May 2010
Location: Forest Park, IL
Posts: 590
|
Re: 1946 Mercury Convertible Top Alignment
Sounds good, thanks.
__________________
Obsessed with all things 1936 Ford since birth... thanks Dad. |
10-14-2022, 01:18 PM | #4 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: 1946 Mercury Convertible Top Alignment
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|