07-21-2021, 09:18 AM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
Clutch
It looks like the clutch can be adjusted in place thru the inspection square hole, can enough of the clutch disc be seen to evaluate it?
|
|
|
|
07-21-2021, 09:34 AM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Clutch
The clutch free-play is adjusted using the adjustable linkage between the pedal link and clutch arm just outside the bell housing/clutch cover.
The pressure plate fingers can be adjusted, if necessary, inside the inspection cover. But, shouldn't need to be touched. The overall inside condition can be somewhat looked at thru the inspection cover. The release bearing collar can be greased inside that cover. Just a pump or 2 is all thats needed. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
07-21-2021, 09:50 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
Re: Clutch
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 12:39 AM.