Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-26-2010, 12:29 PM   #1
Nicki40
Junior Member
 
Join Date: Oct 2010
Posts: 4
Default 1934 Rear spreader Bars

does anyone know the difference between a 1934 Ford Victoria spreader bar and a 1934 regular spreader bar? Thank YOu
Nicki40 is offline   Reply With Quote
Old 10-26-2010, 01:41 PM   #2
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,279
Default Re: 1934 Rear spreader Bars

It does not have the bracket for the spare tire mount.That mount bolts directly to the trunk lid.
deuce lover is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-26-2010, 02:34 PM   #3
Richard (EV8G)
Senior Member
 
Richard (EV8G)'s Avatar
 
Join Date: May 2010
Location: La Verne CA
Posts: 432
Default Re: 1934 Rear spreader Bars

Not sure, but it MAY also have the rear body support brackets as used on PU,
Panel Delivery, Sedan Delivery and Wagon, since the Victoria body also extends further to the rear than do "normal" passenger bodies.
__________________
Early V8 Garage
Pasadena Roadster Club
Richard (EV8G) is offline   Reply With Quote
Old 10-26-2010, 02:48 PM   #4
DICK SPADARO
Senior Member
 
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
Default Re: 1934 Rear spreader Bars

This answer ok? 34 Vicky spreader
Attached Images
File Type: jpg 34 vic spdr.jpg (87.5 KB, 192 views)
__________________
dickspadaro.com
DICK SPADARO is offline   Reply With Quote
Old 10-26-2010, 03:29 PM   #5
Richard (EV8G)
Senior Member
 
Richard (EV8G)'s Avatar
 
Join Date: May 2010
Location: La Verne CA
Posts: 432
Default Re: 1934 Rear spreader Bars

Quote:
Originally Posted by DICK SPADARO View Post
This answer ok? 34 Vicky spreader
Best you can come up with??? Don't have a NOS???

As I suspected EXCEPT the rear body supports are not the same as
others I mentioned; and look to end up lower down and a little further forward, which is not surprising... This is unique to the 34 Victoria; 33 probably different...

R.
__________________
Early V8 Garage
Pasadena Roadster Club
Richard (EV8G) is offline   Reply With Quote
Old 10-28-2010, 06:30 PM   #6
Nicki40
Junior Member
 
Join Date: Oct 2010
Posts: 4
Default Re: 1934 Rear spreader Bars

Sponsored Links (Register now to hide all advertisements)
Thanks to all that replied, they were all very helpful. Thanks for the picture, it turns out that the one I have is for a Victoria. Again I appreciate all the responses.
Nicki40 is offline   Reply With Quote
Old 10-28-2010, 06:33 PM   #7
Nicki40
Junior Member
 
Join Date: Oct 2010
Posts: 4
Default Re: 1934 Rear spreader Bars

Thanks to all of you. It turns out to be for a 1934 Rear Spreader Bar for a Victoria.
Nicki40 is offline   Reply With Quote
Old 10-29-2010, 12:42 PM   #8
S.Duncan
Member
 
Join Date: May 2010
Posts: 85
Default Re: 1934 Rear spreader Bars

Anybody have a picture of a sedan delivery spreader bar?
S.Duncan is offline   Reply With Quote
Old 11-02-2011, 09:17 AM   #9
mkuhn
Junior Member
 
Join Date: Jan 2011
Posts: 17
Default Re: 1934 Rear spreader Bars

Dick
I dont suppose that you still have the 34 vicky spreader bar shown in your pic and would consider selling it and/or a 34 vicky rear tire carrier ------------ had to ask --------- thanks
mkuhn is offline   Reply With Quote
Old 02-25-2018, 07:50 PM   #10
McCready
Junior Member
 
McCready's Avatar
 
Join Date: Sep 2011
Location: High camp
Posts: 29
Send a message via MSN to McCready
Default Re: 1934 Rear spreader Bars

You could probably make one just weld the pickup mounts onto a sedan bar
Attached Images
File Type: jpeg image.jpeg (113.2 KB, 62 views)
McCready is offline   Reply With Quote
Old 02-25-2018, 08:29 PM   #11
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 1934 Rear spreader Bars

This is a 2010 thread. Sure is interesting to see Dick's post, really missed.
JSeery is offline   Reply With Quote
Old 02-27-2018, 12:52 PM   #12
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: 1934 Rear spreader Bars

Ditto on missing Dick. I used to talk to him at Hershey.
I fixed a more screwed up 34 sedan delivery then the one pictured and I took a pickup bar and welded a mount on it to match the body like suggested. You could also take a common one and cut the spare mount off and then weld on the body mount. Get the body on the frame and make that last body mount on the spreader match the body.
deuce_roadster is offline   Reply With Quote
Old 09-08-2018, 03:08 AM   #13
McCready
Junior Member
 
McCready's Avatar
 
Join Date: Sep 2011
Location: High camp
Posts: 29
Send a message via MSN to McCready
Default Re: 1934 Rear spreader Bars

There the same as a Woody spreader arnt they
McCready is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:14 PM.