Go Back   The Ford Barn > General Discussion > Model T (1909-1927)
Reload this Page oilpan aligning jig

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-17-2014, 01:38 AM   #1
jetmek
Senior Member
 
Join Date: May 2010
Location: albany
Posts: 465
Default oilpan aligning jig
I recently got a krwilson pan jig but its missing all the bolted on parts. If anyone has one that would be willing to take some detailed measurements and/or pics for me please email [email protected] id like to take a stab at making the parts that are missing. the only parts that mite be a problem is the cast disk at the rear. Thanks...al
__________________
engine and component overhauls my specialty!
Website- www.godevilgarage.com
jetmek is offline   Reply With Quote
Old 12-17-2014, 05:30 AM   #2
Dodge
Senior Member
 
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,495
Default Re: oilpan aligning jig
Look up Pete Rich in Forestville Ca. In Northern Calif., he has one as far as I know.
He's a nice guy and might do that for you.
Dodge is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-22-2014, 05:58 AM   #3
jetmek
Senior Member
 
Join Date: May 2010
Location: albany
Posts: 465
Default Re: oilpan aligning jig
thanks for the tip...don't happen to have contact info do you?
__________________
engine and component overhauls my specialty!
Website- www.godevilgarage.com
jetmek is offline   Reply With Quote
Old 12-22-2014, 09:27 AM   #4
Steve Jelf
Senior Member
 
Steve Jelf's Avatar
 
Join Date: Apr 2012
Location: Parkerfield KS
Posts: 526
Default Re: oilpan aligning jig
Google is your friend.

https://www.exphonebook.com/main.php...95911&state=ca
Steve Jelf is offline   Reply With Quote
Old 12-23-2014, 03:03 AM   #5
Mike V. Florida
Senior Member
 
Mike V. Florida's Avatar
 
Join Date: May 2010
Location: South Florida
Posts: 14,054
Send a message via AIM to Mike V. Florida
Default Re: oilpan aligning jig
The member Erik Barrett has posted here before about having the jig. Search the membership list here for contact details.

Also
'OSO HANDY RESTORATIONS
Specializing in Model T Fords
320-293-1953
[email protected]
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
Mike V. Florida is offline   Reply With Quote
Old 12-26-2014, 09:13 PM   #6
Erik Barrett
Junior Member
 
Join Date: May 2011
Location: Auburn, Ca.
Posts: 21
Default Re: oilpan aligning jig
Sponsored Links (Register now to hide all advertisements)
I made all the parts for mine, copying ones from our friend Pete Rich. I can send pics. Simple machine work, all referenced off the surface of the jig and the dowel pins. Email for info.
Regards, Erik. [email protected]
Erik Barrett is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:00 PM.