Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-15-2020, 04:24 PM   #81
40larry
Senior Member
 
Join Date: May 2010
Location: Northridge, CA
Posts: 234
Default Re: NEW products available thread

Quote:
Originally Posted by DavidG View Post
The M only appeared on the forged version and only on those supplied by Moore Drop Forgings, which were in a minority of the originals that I've seen, NOS or used.

I have about 40 originals here I keep for restorations and they are about 90% with the big M. Most of these have come from 1939 and 1940 cars which I have parted out over the years. I will check those restorations book as I think the V8 club expects to see the M during judging.
40larry is offline   Reply With Quote
Old 12-15-2020, 04:35 PM   #82
40larry
Senior Member
 
Join Date: May 2010
Location: Northridge, CA
Posts: 234
Default Re: NEW products available thread

Okay I checked the 1938 1939 Book which states that these shackle bars changed in 1939 to the 91A-5468 and increased the length from 1.50" to 1.56" and they were marked with the M for identification. Most likely the reproduction here is 1.50" and is only correct up through 1938.
40larry is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-22-2020, 11:17 AM   #83
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: NEW products available thread

Another new small item. I only made 200 of these and will not make anymore in the future. B-2075 1932-34 Ford front brake actuating pin. Seems like these become lost frequently.




Sent from my iPhone using Tapatalk
35fordtn is offline   Reply With Quote
Old 01-15-2021, 02:04 PM   #84
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: NEW products available thread

Another simple and silly but useful new item. A reproduction of the 32-38 KR Wilson synchronizer hub tool. If you’ve rebuilt one of these you know it can be a pain to compress all 6 springs and balls while sliding the hub into the sleeve. With this tool, as you push the hub down it compresses the springs making it a 3 second job. I use my Kr Wilson one all the time. We only made a limited one time run of them. They are zinc plated.







Sent from my iPhone using Tapatalk
35fordtn is offline   Reply With Quote
Old 01-15-2021, 04:05 PM   #85
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,401
Default Re: NEW products available thread

Wow, now I can get rid of the popsicle sticks and hose clamps that I used for this job.
Zeke3 is offline   Reply With Quote
Old 01-26-2021, 10:51 PM   #86
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: NEW products available thread

Sponsored Links (Register now to hide all advertisements)
Another new one. 1932 Ford v-8 water inlets. Completely CNC machined from aluminum.




Sent from my iPhone using Tapatalk
35fordtn is offline   Reply With Quote
Old 01-26-2021, 11:40 PM   #87
ford nut
Senior Member
 
ford nut's Avatar
 
Join Date: Aug 2013
Location: rosemead ca.
Posts: 574
Default Re: NEW products available thread

super nice.
ford nut is offline   Reply With Quote
Old 03-06-2021, 11:18 AM   #88
Mac VP
Senior Member
 
Mac VP's Avatar
 
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,356
Default Re: NEW products available thread

We just introduced a new item.....the special hardware kit for the Borg Warner overdrive lockout levers. The kit fits all versions of the BW lockout levers. These are the pieces needed to properly clamp the lockout cable to the lever, allowing the lever to rotate without twisting or binding the cable. The special stepped washer and the fine thread bolt (drilled for the wire cable end) are often lost, misplaced, or damaged. You can now buy these pieces, along with the related washers and nut to complete your overdrive transmission installation. Our part number is VP-7689K and is listed in our Overdrive Transmission Parts Prices.
Attached Images
File Type: jpg VP-7689K-lockoutboltkit.jpg (29.8 KB, 986 views)
__________________
VANPELT SALES LLC
Cincinnati, Ohio
Office: 513-724-9486
www.vanpeltsales.com
www.classictransmission.com
Mac VP is offline   Reply With Quote
Old 03-06-2021, 11:20 AM   #89
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,925
Default Re: NEW products available thread

Quote:
Originally Posted by Mac VP View Post
We just introduced a new item.....the special hardware kit for the Borg Warner overdrive lockout levers. The kit fits all versions of the BW lockout levers. These are the pieces needed to properly clamp the lockout cable to the lever, allowing the lever to rotate without twisting or binding the cable. The special stepped washer and the fine thread bolt (drilled for the wire cable end) are often lost, misplaced, or damaged. You can now buy these pieces, along with the related washers and nut to complete your overdrive transmission installation. Our part number is VP-7689K and is listed in our Overdrive Transmission Parts Prices.
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is online now   Reply With Quote
Old 04-15-2022, 01:50 PM   #90
Karl Wescott
Senior Member
 
Karl Wescott's Avatar
 
Join Date: May 2010
Location: Oregon
Posts: 1,265
Default Re: NEW products available thread

Just a teaser today. In from the foundry:

Door dovetail for Station Wagons 1928-32 front and rear doors (and 1933-34 rear doors only).

Inside door handle for 1932 roadster / phaeton. The importers of the Taiwan ones are sold out and do not expect any for a year or more.

Cabriolet top latch handle 1932-36 (when finished will include roller)

Cabriolet top latch handle 1937-38 (when finished will include roller)


These are all 304 stainless. Next steps are polishing and assembly of the handles. I will post again when finished.
Attached Images
File Type: jpg newstuff.jpg (20.5 KB, 866 views)
Karl Wescott is offline   Reply With Quote
Old 04-15-2022, 02:34 PM   #91
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,925
Default Re: NEW products available thread

Quote:
Originally Posted by Karl Wescott View Post
Just a teaser today. In from the foundry:

Door dovetail for Station Wagons 1928-32 front and rear doors (and 1933-34 rear doors only).

Inside door handle for 1932 roadster / phaeton. The importers of the Taiwan ones are sold out and do not expect any for a year or more.

Cabriolet top latch handle 1932-36 (when finished will include roller)

Cabriolet top latch handle 1937-38 (when finished will include roller)


These are all 304 stainless. Next steps are polishing and assembly of the handles. I will post again when finished.
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is online now   Reply With Quote
Old 04-16-2022, 09:14 AM   #92
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
Default Re: NEW products available thread

Karl,


Thanks for creating those items!
DavidG is offline   Reply With Quote
Old 10-20-2022, 10:02 AM   #93
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: NEW products available thread

Thought I'd share this. I have been using these on my driver cars as they appear somewhat original compared to the Pete and Jakes etc out there.. Polyurethane shackles that use slotted nuts and original type shackle bars..

https://thirdgenauto.com/product/new...g-shackle-set/
35fordtn is offline   Reply With Quote
Old 12-15-2022, 01:55 PM   #94
Karl Wescott
Senior Member
 
Karl Wescott's Avatar
 
Join Date: May 2010
Location: Oregon
Posts: 1,265
Default Re: NEW products available thread

1936 Hood latch front catch. "Correct" reproductions from Drake have been unavailable for some time, so I am making these "REPLACEMENT" style without the embossed area. 304 Stainless. Note the hole in the middle is for a rubber bumper.
Attached Images
File Type: jpg 1936HoodLatchFrontCatch.jpg (46.9 KB, 519 views)
Karl Wescott is offline   Reply With Quote
Old 12-15-2022, 02:47 PM   #95
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,460
Default Re: NEW products available thread '32 Cabriolet door part

Had these made as a few of us cabriolet restorers needed them. The guide the window mechanisms I believe. Each door needs two, a left and a right. Very limited production. Need correct top pivot bolts, made at one time by "True Blue 32' [deceased now]. PM me Newc
Attached Images
File Type: jpg DSCN2728.JPG (148.6 KB, 544 views)
File Type: jpg DSCN2725.JPG (158.0 KB, 21 views)
File Type: jpg DSCN2726.JPG (129.2 KB, 531 views)
Newc is offline   Reply With Quote
Old 12-15-2022, 02:57 PM   #96
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,925
Default Re: NEW products available thread

Quote:
Originally Posted by Karl Wescott View Post
1936 Hood latch front catch. "Correct" reproductions from Drake have been unavailable for some time, so I am making these "REPLACEMENT" style without the embossed area. 304 Stainless. Note the hole in the middle is for a rubber bumper.
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is online now   Reply With Quote
Old 12-15-2022, 02:58 PM   #97
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,925
Default Re: NEW products available thread '32 Cabriolet door part

Quote:
Originally Posted by Newc View Post
Had these made as a few of us cabriolet restorers needed them. The guide the window mechanisms I believe. Each door needs two, a left and a right. Very limited production. Need correct top pivot bolts, made at one time by "True Blue 32' [deceased now]. PM me Newc


__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is online now   Reply With Quote
Old 12-15-2022, 09:19 PM   #98
Lawson Cox
Senior Member
 
Lawson Cox's Avatar
 
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
Default Re: NEW products available thread

I'll bet that's why they included their phone number on their web site. I'd also bet that if you call that number ( (815) 276-2578 ), they would likely tell you "yes"...or "no"!


Coop: Sarcasm is not a virtue. Amen.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.

It is better to be seen, than viewed.

"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
Lawson Cox is offline   Reply With Quote
Old 12-15-2022, 10:13 PM   #99
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: NEW products available thread

Quote:
Originally Posted by Lawson Cox View Post
I'll bet that's why they included their phone number on their web site. I'd also bet that if you call that number ( (815) 276-2578 ), they would likely tell you "yes"...or "no"!


Coop: Sarcasm is not a virtue. Amen.

Wow.... you had to go back THREE years for that one. Nevertheless, what you refer to as "sarcasm" is only pointing out what MOST folks either overlook, or find too troublesome to undertake by themselves.

Coop

.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 12-16-2022, 11:34 AM   #100
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,007
Default Re: NEW products available thread

Quote:
Originally Posted by Karl Wescott View Post
1936 Hood latch front catch. "Correct" reproductions from Drake have been unavailable for some time, so I am making these "REPLACEMENT" style without the embossed area. 304 Stainless. Note the hole in the middle is for a rubber bumper.
Karl, thanks for posting and making the '36 hood catch. Had a young guy ask me about a pair at the Albany Swap Meet. Luckily I kept his phone number and called him back yesterday and sent him your way.
TJ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:58 PM.