The Ford Barn

Bill S · 06-14-2012, 01:24 PM

Having problems finding shoulder bolts for a 50 ford convt top irons. Anyone know who sells hex head shoulder bolts with fine threads?
Tks

sonny · 06-14-2012, 02:27 PM

Try Roy Nacewicz Enterprises LTD

peewee2you · 06-14-2012, 02:31 PM

Is it possible that ones for 42 thru 48 would work? They are not very long, so maybe the length is a problem, but those you can get at pretty much any repo shop, like Mac's, Vintage Ford, Dennis Carpenter, etc.

V12Bill · 06-14-2012, 03:33 PM

I made mine on a metal lathe. I used stainless steel bolts and cut them down using the original size for the shoulders. I then polished the stainless steel and didn't have to chrome plate them.

Bill S · 06-15-2012, 11:07 AM

Thanks guys. I sure which I had a lathe.

cmbrucew · 06-15-2012, 02:38 PM

Sponsored Links (Register now to hide all advertisements)

Bill
Try Ace Hdwe and then Mcmaster carr.
Hopes this helps.
Bruce

Works good
Lasts long time

jimvette59 · 06-15-2012, 02:46 PM

I looked them up in Mcmaster carr, they have them. $$$$$$$$

40fordpu · 06-18-2012, 12:10 AM

try fastenal after roy

Bill S · 06-18-2012, 01:30 PM

Thanks guys. What I need is hex head and fine thread. Most places have cap head. Mcmaster Carr has hex head but course thread.

Aquaroscoe · 06-18-2012, 02:15 PM

I got mine at granger

06-14-2012, 01:24 PM	#1
Bill S Senior Member Join Date: May 2010 Location: H.B. So. Calif Posts: 411	Shoulder bolts Having problems finding shoulder bolts for a 50 ford convt top irons. Anyone know who sells hex head shoulder bolts with fine threads? Tks

06-14-2012, 02:27 PM	#2
sonny Senior Member Join Date: Oct 2010 Location: Mantua, Ohio Posts: 269	Re: Shoulder bolts Try Roy Nacewicz Enterprises LTD

06-14-2012, 02:31 PM	#3
peewee2you Senior Member Join Date: May 2010 Location: Elk Grove, CA Posts: 663	Re: Shoulder bolts Is it possible that ones for 42 thru 48 would work? They are not very long, so maybe the length is a problem, but those you can get at pretty much any repo shop, like Mac's, Vintage Ford, Dennis Carpenter, etc.

06-14-2012, 03:33 PM	#4
V12Bill Senior Member Join Date: May 2010 Location: Mt. Holly,NJ Posts: 1,822	Re: Shoulder bolts I made mine on a metal lathe. I used stainless steel bolts and cut them down using the original size for the shoulders. I then polished the stainless steel and didn't have to chrome plate them.

06-15-2012, 11:07 AM	#5
Bill S Senior Member Join Date: May 2010 Location: H.B. So. Calif Posts: 411	Re: Shoulder bolts Thanks guys. I sure which I had a lathe.

06-15-2012, 02:38 PM	#6
cmbrucew Senior Member Join Date: Dec 2010 Location: North of sandy ago, CA. Posts: 2,064	Re: Shoulder bolts Sponsored Links (Register now to hide all advertisements) Bill Try Ace Hdwe and then Mcmaster carr. Hopes this helps. Bruce Works good Lasts long time

06-15-2012, 02:46 PM	#7
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,329	Re: Shoulder bolts I looked them up in Mcmaster carr, they have them. $$$$$$$$

06-18-2012, 12:10 AM	#8
40fordpu Senior Member Join Date: Jun 2010 Location: Murrieta, CA Posts: 637	Re: Shoulder bolts try fastenal after roy

06-18-2012, 01:30 PM	#9
Bill S Senior Member Join Date: May 2010 Location: H.B. So. Calif Posts: 411	Re: Shoulder bolts Thanks guys. What I need is hex head and fine thread. Most places have cap head. Mcmaster Carr has hex head but course thread.

06-18-2012, 02:15 PM	#10
Aquaroscoe Member Join Date: May 2010 Location: SF Bay Area Posts: 36	Re: Shoulder bolts I got mine at granger