|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-24-2014, 04:05 PM | #1 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
31' Generator not charging
Well I tried to lower my generator output from 12A to something less but appears I've likely made things worse. Before I yank the generator and have at it figured I'd toss what I'm seeing:
Ammeter: At idle, 0A. At speed no charging.. I do see 1-3A when I step on the breaks (load).... Wondering if there some way I might the generator output less the cutout... http://www.modelaford.org/technical/...amcolor2sm.jpg
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
07-24-2014, 04:20 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,033
|
Re: 31' Generator not charging
Have you adjusted the third brush?
Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
07-24-2014, 04:38 PM | #3 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: 31' Generator not charging
If you moved the third brush, how much did you change it ? Have you tried different settings ?
|
07-24-2014, 05:11 PM | #4 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: 31' Generator not charging
Yeah I have a 3rd bush but it's very hard to move...
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
07-24-2014, 05:49 PM | #5 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: 31' Generator not charging
Taken the Generator off... simple enough for that... my 3rd brush ring is frozen so only one what to see that's up.... I'll make some video of this... soon...
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
07-24-2014, 06:46 PM | #6 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: 31' Generator not charging
Sponsored Links (Register now to hide all advertisements)
https://www.youtube.com/watch?v=IXU9U6cGl68 So as my Generator rebuild from fmr. owner, a likely new armature, but 3rd bush ring, and field windings have been around for a while....
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio Last edited by mshmodela; 07-24-2014 at 07:00 PM. |
07-24-2014, 06:48 PM | #7 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: 31' Generator not charging
So got the end cap off and 3rd brush ring just stuck due to old oil,dirt, etc.. I've got it off so it needs a cleaning...
End cap and 3rd ring: https://www.youtube.com/watch?v=94j8doUPgGY I took very fine file and removed to two spurs on the ring... now I have full range of motion on my 3rd bush ring... https://www.youtube.com/watch?v=yYlpy75GdA4
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio Last edited by mshmodela; 07-24-2014 at 09:05 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|