The Ford Barn

Gaspumpsam · 12-17-2020, 11:16 AM

A friend dropped off a Ford std, 3 spd with OD, and said Merry Christmas!!!
Very nice but what is it?
Bell housing appears to have bolt pattern of maybe a 312 engine
Trans has casting # - C1A-7006A2
OD tail shaft has casting #-R10F-1. W2
Side shift levers, no cover on top of trans, believe governor on passenger side of trans( not sure of voltage yet) solenoid sits at about 7 o’clock , manual od lever
points down, trans mount base about half way back on OD tail shaft.
Input shaft appears to be smaller like a car, not the heavy one like a truck.
Any help will be appreciated.
Merry Christmas to all, from us up here in Canada. Stay safe everyone!!!

12-17-2020, 11:16 AM	#1
Gaspumpsam Junior Member Join Date: Aug 2017 Location: Quesnel, BC, Canada Posts: 8	What trans have I got A friend dropped off a Ford std, 3 spd with OD, and said Merry Christmas!!! Very nice but what is it? Bell housing appears to have bolt pattern of maybe a 312 engine Trans has casting # - C1A-7006A2 OD tail shaft has casting #-R10F-1. W2 Side shift levers, no cover on top of trans, believe governor on passenger side of trans( not sure of voltage yet) solenoid sits at about 7 o’clock , manual od lever points down, trans mount base about half way back on OD tail shaft. Input shaft appears to be smaller like a car, not the heavy one like a truck. Any help will be appreciated. Merry Christmas to all, from us up here in Canada. Stay safe everyone!!!