|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-18-2021, 05:49 PM | #1 |
Junior Member
Join Date: Dec 2012
Location: San Diego, CA
Posts: 21
|
Windows install 35 5 Window coupe
Hello, does anyone have the measurement for the window glass channel. Need from front of glass to channel. Thanks
|
02-18-2021, 10:30 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,825
|
Re: Windows install 35 5 Window coupe
This may be totally meaningless; but since the front of the doors & the regulators are the same, and it also appears that the window moves back the same amount to vent this may be a starting point. On my 3W it measures 15-1/4" inches from the front edge of the glass to the center line of the roller.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-18-2021, 11:31 PM | #3 |
Senior Member
Join Date: Jan 2011
Posts: 342
|
Re: Windows install 35 5 Window coupe
I have a 36 5 window, same car essentially. When I installed mine, I put the glass in the bare metal channel and used tape to hold in place to figure out correct position before I put the rubber in the channel. It was trial and error, but couldn't think of any other way. Good luck. Rod
|
02-19-2021, 01:23 AM | #4 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,832
|
Re: Windows install 35 5 Window coupe
Sponsored Links (Register now to hide all advertisements)
__________________
Unfortunately, two half wits don't make a whole wit! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|