The Ford Barn

old31 · 06-21-2022, 07:24 AM

Quote:

Originally Posted by CarlG

I changed mine out for convex mirrors as well. Bumped them up to 6" as well. Big improvement.

Carl, what is the part number you used for the 6" convex.

Joe K · 06-21-2022, 08:52 AM

My 29 A CC (3-21-29) has the D-nuts and a mirror on the cast iron bracket installed.

Don't forget to mention the unusual "dome-headed" hex screws (5/16-24 x 7/8 A20798) which attach the 82A (and 150A) bracket to the pillar. These are not reproduced IIRC.

Joe K

katy · 06-21-2022, 10:35 AM

Try: https://www.truck-lite.com/97621.html
Or: https://www.velvac.com/products/thre...inless-steel-0

CarlG · 06-22-2022, 06:48 PM

Quote:

Originally Posted by old31

Carl, what is the part number you used for the 6" convex.

CIPA-USA, Inc.
Port Huron, MI
www.cipausa.com

Part # 48600

I opted for the black finish mirror, they also make the same thing in a bright or stainless finish.

I bought them on Amazon to get free freight. YMMV

06-21-2022, 08:52 AM	#42
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: CCPU Rear View Mirror My 29 A CC (3-21-29) has the D-nuts and a mirror on the cast iron bracket installed. Don't forget to mention the unusual "dome-headed" hex screws (5/16-24 x 7/8 A20798) which attach the 82A (and 150A) bracket to the pillar. These are not reproduced IIRC. Joe K __________________ Shudda kept the horse. Last edited by Joe K; 06-21-2022 at 09:05 AM.

06-21-2022, 10:35 AM	#43
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,044	Re: CCPU Rear View Mirror Try: https://www.truck-lite.com/97621.html Or: https://www.velvac.com/products/thre...inless-steel-0 __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!