|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-23-2022, 01:31 PM | #1 |
Junior Member
Join Date: Jan 2014
Location: Sweden
Posts: 8
|
Mercury 1951 turn signal switch
I im in search of a turn signal switch to Mercury 51 us made.
Anybody have part number for that or know if that are interchangeable whit ford 51-55 B5A-13341-A https://www.dennis-carpenter.com/cars/lighting/turn-signal/b5a-13341-a-turn-signal-switch Thanks Tomas |
03-23-2022, 02:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,925
|
Re: Mercury 1951 turn signal switch
The 1949-52 Mercury Chassis Parts Catalog on page 254 shows the following info:
8L-14486 Switch and wiring (turn signal) for model 9M 1949 0L-14486 Switch and wiring (turn signal) for model 0M 1950 1M-14486-A Switch and wiring (turn signal) for model 1M and MA 1951 and 1952 ALSO, the directional switch and parts is shown on page 274 here: https://www.lincolnoldparts.com/pdf/...ssis-Parts.pdf Hope this helps. Noone is reproducing the mercury switches but someone must have a good used one. Last edited by 19Fordy; 03-23-2022 at 02:24 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
03-23-2022, 02:25 PM | #3 |
Junior Member
Join Date: Jan 2014
Location: Sweden
Posts: 8
|
Re: Mercury 1951 turn signal switch
19Fordy thanks
|
03-23-2022, 05:28 PM | #4 |
Senior Member
Join Date: Nov 2010
Location: Beamsville,Ontario,Canada
Posts: 482
|
Re: Mercury 1951 turn signal switch
I’m looking for the same thing but for my 1951 Meteor or Ford. Good luck in your search! Ted
|
03-23-2022, 06:04 PM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,925
|
Re: Mercury 1951 turn signal switch
I wonder if the Dennis Carpenter switch could be modified to work. The switch itself looks similar.
|
03-24-2022, 02:19 AM | #6 |
Junior Member
Join Date: Jan 2014
Location: Sweden
Posts: 8
|
Re: Mercury 1951 turn signal switch
|
03-24-2022, 10:57 AM | #7 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,925
|
Re: Mercury 1951 turn signal switch
|
03-24-2022, 11:17 AM | #8 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,425
|
Re: Mercury 1951 turn signal switch
The late replacements for the 1M or MA part number has plastic covered wires. I found an NOS one on flea-pay so they do show up now and then. The originals are relatively easy to clean and I've replaced the wire leads on them several times but some of the modern replacement cloth covered wires don't fit well through the channel in the steering column so a person may have to get creative if they want it to look original.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|