|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-30-2010, 05:35 PM | #1 |
Member
Join Date: May 2010
Location: Ooltewah Tn.
Posts: 95
|
17" Ford wire wheels & A model parts
City:
Chattanooga
State:
Tn.
I need a good set of '33-'34 Ford 17" wire wheels.
I also need a good A model dropped axle, open drive banjo rear end, F-1 or '40 steering box and column, '30-'31 sedan windshield frame, A model coupe seats, etc.... Kevin Ooltewah Speed Shop |
05-31-2010, 12:49 AM | #2 |
Senior Member
Join Date: May 2010
Location: West Allis Wisconsin
Posts: 132
|
Re: 17" Ford wire wheels & A model parts
Hello I have (3) stock Henry Ford 33-34 wire wheels that mount 17 inch tires. These were hand picked by me over the last few years. All 3 have no bent spokes! All three have perfect lug holes. All three have good valve stem holes. One is painted red, one is blue and the third is original black paint. the tire bead area has minor surface rust but this will not show when tires are mounted. A sandblasting will give you 3 concourse rims. I looked back and I have $95.00 in these, if I could just break even that would be great. Shipping of course will be extra. You can contact me by email me at [email protected]
|
Sponsored Links (Register now to hide all advertisements) |
|
05-31-2010, 01:52 PM | #3 |
Senior Member
Join Date: May 2010
Location: northern Indiana
Posts: 1,618
|
Re: 17" Ford wire wheels & A model parts
Sponsored Links (Register now to hide all advertisements)
__________________
Unspoken gratitude is helpful to no one. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|