|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-30-2020, 04:02 PM | #21 |
Junior Member
Join Date: Aug 2020
Location: Franklin, MA
Posts: 14
|
Re: Throw out bearing spring replacement
So I got the pin out of the shaft/collar. I ended up cutting off the collar with a small grinder. With that off, the rest of the pin slowly tapped out.
Installed new bushings in the pedals, greased it up nice and put it all back together. Not perfect but the clutch pedal movement is mush smoother now and allows for an easier adjustment and throw-out bearing is pulling back appropriately when the clutch is disengaged. Last edited by ossieandgeorge; 09-01-2020 at 07:55 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|