The Ford Barn

tetanus · 04-10-2023, 06:08 PM

Have not tried yet figuring I would ask the pros before I try to wrestle them out. It’s a 59 block with mushroom stem valves and 185 isky springs.was wondering if I can get springs out of there without pulling heads?

Jack E/NJ · 04-10-2023, 06:43 PM

Maybe. But pull the heads anyway. 8^)

cadillac512 · 04-10-2023, 08:52 PM

Sponsored Links (Register now to hide all advertisements)

Unless the camshaft and lifters are removed to allow the springs down the lifter bores, I don't see how it will work. Just not enough room.

Terry

04-10-2023, 06:08 PM	#1
tetanus Member Join Date: May 2010 Location: Mayville WI Posts: 52	Valve spring removal with heads on possible?? Have not tried yet figuring I would ask the pros before I try to wrestle them out. It’s a 59 block with mushroom stem valves and 185 isky springs.was wondering if I can get springs out of there without pulling heads?

04-10-2023, 06:43 PM	#2
Jack E/NJ Senior Member Join Date: May 2010 Posts: 2,173	Re: Valve spring removal with heads on possible?? Maybe. But pull the heads anyway. 8^)

04-10-2023, 08:52 PM	#3
cadillac512 Senior Member Join Date: Apr 2019 Location: Kansas Posts: 921	Re: Valve spring removal with heads on possible?? Sponsored Links (Register now to hide all advertisements) Unless the camshaft and lifters are removed to allow the springs down the lifter bores, I don't see how it will work. Just not enough room. Terry __________________ "It don't take but country smarts to solve the problem" (Smokey Yunick) '41 Merc Town Sedan / 260" 8CM engine '66 Fairlane four door / "warmed up" 302