01-26-2020, 04:40 AM | #1 |
Junior Member
Join Date: May 2010
Location: greymouth/new zealand
Posts: 3
|
Distributor
I'm running FS ignition on my B Motor, timing motor with timing light but timing light is hunting back and forward consistently by 10 degrees. Put original distributor back in but no change. Could you give any suggestion here as to what the problem could be. Thanks.
|
01-26-2020, 11:13 AM | #2 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,351
|
Re: Distributor
Sponsored Links (Register now to hide all advertisements)
The only thing I can think of, if the light is good, is the actually timing of the motor is sloppy and jumping around. Seems unlikely, unless your at retard with a overlap cam. I know my Winfield SU 1at a low idle ,retarded, will work the camshaft back-and-forth, because I had a week cam spring. |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|