|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-30-2016, 01:01 PM | #1 |
Member
Join Date: Apr 2014
Posts: 84
|
I D Banjo Steering Wheel
Can anyone ID This banjo steering Wheel. I was told 39. If so is there any other years that the horn button will work?This will be a nice wheel after doing a little repair and paint.
|
07-30-2016, 01:29 PM | #2 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: I D Banjo Steering Wheel
Quote:
http://www.fordbarn.com/forum/showthread.php?t=158116 Last edited by V8COOPMAN; 07-30-2016 at 01:35 PM. |
|
Sponsored Links (Register now to hide all advertisements) |
|
07-30-2016, 02:33 PM | #3 |
Senior Member
Join Date: Dec 2013
Location: Covedale,oh
Posts: 226
|
Re: I D Banjo Steering Wheel
The 37-39 wheels are similar,they used a light switch and horn button, attached to a rod.What's your application?
|
07-30-2016, 04:16 PM | #4 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: I D Banjo Steering Wheel
38 and 39 the spokes spread wider at the hub.37 hub different for the horn button.37 is all alone.Barnnone's wheel is a 37.
|
07-30-2016, 04:31 PM | #5 |
Member
Join Date: Apr 2014
Posts: 84
|
Re: I D Banjo Steering Wheel
I have another question does the slug style have any consideration . On mine you will see 1 hole on the back not 3 like the pic that DD posted.
I have a 39 drop that I would like to use. I believe I need a 39 steering mask is that correct or can I use something else? I have a 31 sedan with a flathead motor and would like to use cross Steer box. Thanks all for your help. |
07-30-2016, 05:04 PM | #6 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: I D Banjo Steering Wheel
Sponsored Links (Register now to hide all advertisements)
|
07-30-2016, 05:13 PM | #7 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: I D Banjo Steering Wheel
I believe he's speaking of the three pieces that sit half-way on the three sets of spokes. If you look at the rear side of his wheel, EACH piece appears to have one hole in it's center. Looking very closely at the wheel I posted, those three thingies EACH appear to have THREE holes, compared to his ONE hole. DD
|
07-30-2016, 07:39 PM | #8 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: I D Banjo Steering Wheel
Thanks DD.That could be made from a different vendor.
|
07-31-2016, 10:20 AM | #9 |
Member
Join Date: Apr 2014
Posts: 84
|
Re: I D Banjo Steering Wheel
Thanks for the help for the ID of my banjo Wheel. Depending if I can find a good steering box with the correct Mast or try what deuce lover said using a exhaust tube and make my own. prefer using Ford parts when possible.Still have a lot to do before the steering box is a issue.
|
07-31-2016, 11:29 AM | #10 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: I D Banjo Steering Wheel
Quote:
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
|
07-31-2016, 01:35 PM | #11 |
Member
Join Date: Apr 2014
Posts: 84
|
Re: I D Banjo Steering Wheel
Great I will PM you .. Thanks George
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|