Pressure Plate

['31 Patina]

I'm replacing the pressure plate in my '31 coupe. I noticed that some vendors have the option of either buying a new pressure plate or a rebuilt one. Is it better to buy an original rebuilt or a new reproduction?

Thanks.

J

[ford3]

most new plates come from china and arent worth a crap, have yours rebuilt by fort wayne clutch rebuilders

[Tom Wesenberg]

I'm using a good used original I picked up years ago at a swap meet. It's smooth as silk.

[Chuck Sea/Tac]

Mine was a rebuild from Burt's 13 ? Years ago.Don't know who did it , but 25,000, miles and as Tom says, "smooth as silk".

[John Duden]

Originally Posted by Tom Wesenberg

I'm using a good used original I picked up years ago at a swap meet. It's smooth as silk.

Most are! at least i think, just check them over, clean the grease off align bolt on and go!
Just my 2cents
john

[Rowdy]

Sponsored Links (Register now to hide all advertisements)

I have a stack of good used pressure plates. Likely close to 20 of them in the parts shed. Rod