|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-06-2019, 03:27 PM | #1 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,954
|
Source 59AB large port Intake gaskets
Guys who has best deal on large port 59AB intake gaskets.
Thanks |
11-06-2019, 04:01 PM | #2 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,405
|
Re: Source 59AB large port Intake gaskets
If your ports are as big as they should be, no one makes them commercially.
Get your little gasket tapping hammer out. |
Sponsored Links (Register now to hide all advertisements) |
|
11-06-2019, 05:24 PM | #3 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,211
|
Re: Source 59AB large port Intake gaskets
We just made a set for the dragster eng refresh,
we got a sheet of proper material from the supplier and made them our self,my boy even cut the port holes in them on an angle so there wasn't a step. Lawrie |
11-06-2019, 07:39 PM | #4 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,062
|
Re: Source 59AB large port Intake gaskets
I tend to use BestGaskets - then port them with an Xacto knife . . .
|
11-07-2019, 07:30 AM | #5 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,062
|
Re: Source 59AB large port Intake gaskets
|
11-07-2019, 07:35 AM | #6 |
Senior Member
Join Date: May 2010
Location: SLC Utah
Posts: 798
|
Re: Source 59AB large port Intake gaskets
Sponsored Links (Register now to hide all advertisements)
__________________
RIP Tyler... My Son, Helper & Best Friend. Feb '78 to Father's Day '10. www.97-express.com ~ [email protected] |
11-07-2019, 10:51 AM | #7 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,855
|
Re: Source 59AB large port Intake gaskets
What's the application of the engine? Having built a few street engines, I find the stock ports do a fine job. Compression and displacement, my 280 with EAB can is one of them.
|
11-07-2019, 02:00 PM | #8 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: Source 59AB large port Intake gaskets
I have one for a 8ba build made by Best and it is already cut properly but you could trim more if needed. Got it rrom Hot Rod And Custom Supply. Price was 10.95 in 2001. Maybe I will finish engine someday.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|