The Ford Barn

Conaway2 · 11-16-2019, 06:31 PM

I’m rebuilding 2 oil pumps and have noticed several differences. One pump, which I believe is a newer one (according to the service manual) has 4 ribs on the body, a smaller discharge hole and the shield over the screen is held in place by 2 screws. The other pump has a smooth shaft, a larger discharge hole and no screws holding the shield on. In fact, it;s not clear to me how the shield is held in place - was there some sort of clip ??

Many thanks -
JIm

Purdy Swoft · 11-16-2019, 07:00 PM

There was a thread about the early oil pumps a year or two ago . I think that Steve Plucker started the thread . There was some pics of a few very early oil pumps that I've never seen before . Try a search .

Tom Endy · 11-16-2019, 07:43 PM

The attached articles may be of help.

Tom Endy

Tom Endy · 11-16-2019, 07:47 PM

Also see attached.

Tom Endy

Bob Bidonde · 11-17-2019, 08:50 AM

Hi Tom,

Thanks for posting the oil pan tray info.

Conaway2 · 11-17-2019, 04:31 PM

Sponsored Links (Register now to hide all advertisements)

thanks everyone for your help and posts.

Jim

11-16-2019, 06:31 PM	#1
Conaway2 Senior Member Join Date: Apr 2019 Location: Mt. Pleasant, SC Posts: 601	Oil Pump Question I’m rebuilding 2 oil pumps and have noticed several differences. One pump, which I believe is a newer one (according to the service manual) has 4 ribs on the body, a smaller discharge hole and the shield over the screen is held in place by 2 screws. The other pump has a smooth shaft, a larger discharge hole and no screws holding the shield on. In fact, it;s not clear to me how the shield is held in place - was there some sort of clip ?? Many thanks - JIm

11-16-2019, 07:00 PM	#2
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: Oil Pump Question There was a thread about the early oil pumps a year or two ago . I think that Steve Plucker started the thread . There was some pics of a few very early oil pumps that I've never seen before . Try a search .

11-17-2019, 08:50 AM	#5
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 3,463	Re: Oil Pump Question Hi Tom, Thanks for posting the oil pan tray info. __________________ Bob Bidonde

11-17-2019, 04:31 PM	#6
Conaway2 Senior Member Join Date: Apr 2019 Location: Mt. Pleasant, SC Posts: 601	Re: Oil Pump Question Sponsored Links (Register now to hide all advertisements) thanks everyone for your help and posts. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode