|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-20-2017, 07:38 PM | #1 |
Senior Member
Join Date: May 2010
Location: Kokomo, Indiana
Posts: 1,731
|
Need Seat Info.
I'm in the process of rebuilding a Model 40B Roadster body and I have a seat related question for those who know such things.
My impression, after looking at numerous catalogs and research a couple of books I have, is that the roadster seat does not have a seat frame such as used in the coupes. Further, it appears that the seat cushion attaches directly to the seat riser and the back cushion attaches at the top only and is held in place at the bottom by the seat cushion. Is this correct or am I way off base? All information gratefully accepted. Thanks,
__________________
Henry |
08-20-2017, 08:25 PM | #2 |
Senior Member
Join Date: May 2010
Location: Austin, Texas
Posts: 925
|
Re: Need Seat Info.
My impression, after looking at numerous catalogs and research a couple of books I have, is that the roadster seat does not have a seat frame such as used in the coupes. .....True.
Further, it appears that the seat cushion attaches directly to the seat riser ,,,,,,False Seat cushion sits on the riser and is removal for access to the tool box under it. and the back cushion attaches at the top.......True and is held in place at the bottom by the seat cushion.,,,,,,,False. Fastened at the bottom to the riser.
__________________
I noticed the harder I work the luckier I get! |
Sponsored Links (Register now to hide all advertisements) |
|
08-20-2017, 08:54 PM | #3 |
Senior Member
Join Date: May 2010
Location: Kokomo, Indiana
Posts: 1,731
|
Re: Need Seat Info.
MAG - Q: Does the seat cushion have a wooden frame such as the one on the coupe o do the springs just sit on the riser?
Many thanks for the previous info!
__________________
Henry |
08-21-2017, 06:01 AM | #4 |
Senior Member
Join Date: Oct 2014
Location: Keystone Heights, FL
Posts: 647
|
Re: Need Seat Info.
Not sure about the early models but there isn't a wooden frame in my 31 roadster seat.
Wire frame of cushion sit on and it is held in position by the seat riser.
__________________
I Love Anything That Turns Money Into Noise |
08-21-2017, 06:53 AM | #5 |
Senior Member
Join Date: May 2010
Location: Kokomo, Indiana
Posts: 1,731
|
Re: Need Seat Info.
Thanks, Bill. That's what I thought. The '28-'29 models do have a wooden bottom, I think.
__________________
Henry |
08-21-2017, 07:08 AM | #6 |
Senior Member
Join Date: May 2010
Location: Austin, Texas
Posts: 925
|
Re: Need Seat Info.
Sponsored Links (Register now to hide all advertisements)
__________________
I noticed the harder I work the luckier I get! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|