The Ford Barn

dennis lott · 04-20-2016, 03:45 PM

Does anyone out there know where I can get an original type choke rod support for a late 31 town sedan. Most Model A people that I have asked say that they are all alike or that I should just order a new one. Well they are not all alike and no body sells any of them. I have on the tank but it is from a different car and fits at a different angle. Thanks to all. Den (aka, PA)

jw hash · 04-20-2016, 04:45 PM

I have a good one on a junk late tank.

dennis lott · 04-20-2016, 04:54 PM

Thank you for the prompt reply. could you give me a price and an address to send the money to. den. (aka, Pa) 870-577-3161

jw hash · 04-20-2016, 07:31 PM

PM sent

BRENT in 10-uh-C · 04-21-2016, 06:25 AM

So if you don't mind me asking, once you have one how do you plan to rivet it on?

dennis lott · 04-21-2016, 08:17 AM

Sponsored Links (Register now to hide all advertisements)

It was many years when I installed the one that is there now. I will heat it up to see what I used to attache it. it probably is silver. any way that is how I plan to attach it if the base is not contaminated with brass. Please dont worry the tank is cleaned and derusted like new. I use a very long soak with 50/50 molasses and water, then with veniger, then with molasses again. thanks for your concern. Den (aka, Pa)
PS. cant spell, never could

C26Pinelake · 04-21-2016, 08:36 AM

What is the purpise of the molasses? Wayne

dennis lott · 04-26-2016, 05:50 PM

thanks to all who read my cry for help. JW Hash had just what I needed

04-20-2016, 03:45 PM	#1
dennis lott Junior Member Join Date: Dec 2015 Location: Harrison Arkansas Posts: 7	Choke rod support Does anyone out there know where I can get an original type choke rod support for a late 31 town sedan. Most Model A people that I have asked say that they are all alike or that I should just order a new one. Well they are not all alike and no body sells any of them. I have on the tank but it is from a different car and fits at a different angle. Thanks to all. Den (aka, PA)

04-20-2016, 04:45 PM	#2
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Choke rod support I have a good one on a junk late tank.

04-20-2016, 04:54 PM	#3
dennis lott Junior Member Join Date: Dec 2015 Location: Harrison Arkansas Posts: 7	Re: Choke rod support Thank you for the prompt reply. could you give me a price and an address to send the money to. den. (aka, Pa) 870-577-3161

04-20-2016, 07:31 PM	#4
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Choke rod support PM sent

04-21-2016, 06:25 AM	#5
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,520	Re: Choke rod support So if you don't mind me asking, once you have one how do you plan to rivet it on? __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

04-21-2016, 08:17 AM	#6
dennis lott Junior Member Join Date: Dec 2015 Location: Harrison Arkansas Posts: 7	Re: Choke rod support Sponsored Links (Register now to hide all advertisements) It was many years when I installed the one that is there now. I will heat it up to see what I used to attache it. it probably is silver. any way that is how I plan to attach it if the base is not contaminated with brass. Please dont worry the tank is cleaned and derusted like new. I use a very long soak with 50/50 molasses and water, then with veniger, then with molasses again. thanks for your concern. Den (aka, Pa) PS. cant spell, never could

04-21-2016, 08:36 AM	#7
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Choke rod support What is the purpise of the molasses? Wayne

04-26-2016, 05:50 PM	#8
dennis lott Junior Member Join Date: Dec 2015 Location: Harrison Arkansas Posts: 7	Re: Choke rod support thanks to all who read my cry for help. JW Hash had just what I needed