The Ford Barn

akruzer · 06-14-2023, 03:47 PM

I'm attempting to reinstall the steel rain gutter on my '30 Tudor. My question is, does the gutter part itself fit over the top of the mounting bracket or inside the top groove of the bracket? I've attached a poor end view sketch hoping it will help make sense to my question. Please don't scold me for not taking better notes when I took it off, my wife does that well enough.

Big hammer · 06-14-2023, 04:47 PM

Over the top, hook the top and snap it down at the bottom

akruzer · 06-15-2023, 10:04 AM

Wow, for the distance it will need to travel it looks like it will take a 40lb sledge hammer with an over the head swing....

It's a push just to get it to the "B" diagram level.

DkFordor · 06-16-2023, 05:40 AM

Did you bend it to shape yourself?

akruzer · 06-20-2023, 09:03 AM

Sponsored Links (Register now to hide all advertisements)

No, I just failed to take pictures back when I took it off. Not smart.

06-14-2023, 04:47 PM	#2
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,138	Re: End View of rain gutter installation Over the top, hook the top and snap it down at the bottom __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done

06-15-2023, 10:04 AM	#3
akruzer Junior Member Join Date: Mar 2022 Posts: 16	Re: End View of rain gutter installation Wow, for the distance it will need to travel it looks like it will take a 40lb sledge hammer with an over the head swing.... It's a push just to get it to the "B" diagram level.

06-16-2023, 05:40 AM	#4
DkFordor Member Join Date: Oct 2020 Location: Denmark, Northern Europe Posts: 73	Re: End View of rain gutter installation Did you bend it to shape yourself?

06-20-2023, 09:03 AM	#5
akruzer Junior Member Join Date: Mar 2022 Posts: 16	Re: End View of rain gutter installation Sponsored Links (Register now to hide all advertisements) No, I just failed to take pictures back when I took it off. Not smart.