The Ford Barn

MN Stumpjumper · 02-10-2013, 01:55 PM

I want to take the bed off my pickup to do some frame repairs. Do Ihave to romove all the bolts out of the sheet metal liner or is there an easier way. Thanks.

Lawson Cox · 02-10-2013, 02:03 PM

NO, you should have 8 large bolts in corners and down the sides. Those are the ones you have to remove. The small bolts hold the sheet metal floor to the sub frame. They do not need to be removed.

MN Stumpjumper · 02-10-2013, 10:24 PM

Sponsored Links (Register now to hide all advertisements)

Thanks Lawson.

02-10-2013, 01:55 PM	#1
MN Stumpjumper Senior Member Join Date: May 2010 Posts: 203	32 pickup bed removal I want to take the bed off my pickup to do some frame repairs. Do Ihave to romove all the bolts out of the sheet metal liner or is there an easier way. Thanks.

02-10-2013, 02:03 PM	#2
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 32 pickup bed removal NO, you should have 8 large bolts in corners and down the sides. Those are the ones you have to remove. The small bolts hold the sheet metal floor to the sub frame. They do not need to be removed. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

02-10-2013, 10:24 PM	#3
MN Stumpjumper Senior Member Join Date: May 2010 Posts: 203	Re: 32 pickup bed removal Sponsored Links (Register now to hide all advertisements) Thanks Lawson.