|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-23-2020, 06:28 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 1,262
|
Front Spindle Measurements
Can someone give me the diameter of the front spindles at the rear wheel bearing as well as at the outer wheel bearing?
|
09-23-2020, 09:19 PM | #2 | |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
Re: Front Spindle Measurements
Quote:
Are you looking for the Ford spec, or what people have measured? It helps to know what you're working on. Are you troubleshooting the fit of bearings to spindles? If so, to find the problem, you would need the Ford specs, which I don't have.
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" Last edited by 1930-Pickup; 09-24-2020 at 12:13 AM. |
|
Sponsored Links (Register now to hide all advertisements) |
|
09-24-2020, 10:52 AM | #3 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Front Spindle Measurements
Here's some part numbers, you can probably pull up the dimensions using these numbers:
Front wheels A–1201 Front wheel inner race 15250 Timken A–1202 Front wheel inner bearing 15118 Timken A–1216 Front wheel outer race 09196 Timken A–1216 Front wheel outer race 09194 BCA Federal Mogul A–1217 Front wheel outer bearing 09074 Timken A–1217 Front wheel outer bearing 67048 LM
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
09-25-2020, 04:24 PM | #4 |
Senior Member
Join Date: May 2010
Location: Massachusetts
Posts: 259
|
Re: Front Spindle Measurements
Joe, just measured a spare I had.
inner = 1.189" outer = .750" Hope this helps. |
09-26-2020, 09:39 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 1,262
|
Re: Front Spindle Measurements
Sponsored Links (Register now to hide all advertisements)
Doug Linden -Thanks Doug for the measurements! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|