Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-05-2020, 12:49 PM   #1
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default 40-41 Pickup Bed Wedges

The Pickup has two left to right cross pieces under the bed that are on the frame where the rear axle kickup occurs and use wedges on the the underside of the frame rail to keep things flat when bolted down. Anyone repop these or have 3 or 4 around? I have one to use for an example to make them up but I wanted to see if they are out there or not .....

Thanks ...
TomT/Williamsburg is offline   Reply With Quote
Old 07-05-2020, 02:38 PM   #2
tobby
Member
 
Join Date: Jun 2010
Posts: 45
Default Re: 40-41 Pickup Bed Wedges

look at mc master carr website #91152A033 you can purchase 10 for $9.44..... Tobby
tobby is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-05-2020, 02:42 PM   #3
tobby
Member
 
Join Date: Jun 2010
Posts: 45
Default Re: 40-41 Pickup Bed Wedges

i have 2 leftover if you can't order them
tobby is offline   Reply With Quote
Old 07-05-2020, 04:41 PM   #4
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,005
Default Re: 40-41 Pickup Bed Wedges

Probable the same wedges that they use to change the pinion angle on vehicles with parallel leaf springs.
TJ is offline   Reply With Quote
Old 07-05-2020, 09:27 PM   #5
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default Re: 40-41 Pickup Bed Wedges

Thank you gents, especially Tobby - looks like mc master Carr has them and I will order them tomorrow! Thank you very much!
TomT/Williamsburg is offline   Reply With Quote
Old 07-11-2020, 07:42 AM   #6
MN Stumpjumper
Senior Member
 
MN Stumpjumper's Avatar
 
Join Date: May 2010
Posts: 203
Default Re: 40-41 Pickup Bed Wedges

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by TomT/Williamsburg View Post
Thank you gents, especially Tobby - looks like mc master Carr has them and I will order them tomorrow! Thank you very much!
Tom, could you please post a picture of the installation of the wedges when you do it. Thank you.
MN Stumpjumper is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:56 AM.