|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-24-2021, 05:07 PM | #1 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
how to remove front hub inner bearing seal?
hello
i have been working on my brakes i am replacing the bearings on the frt. the hub inner bearing seal i can not get it off the backing plate,spindle . what it the best way to remove the old one thank you kevin 1930 tudor |
01-24-2021, 06:00 PM | #2 |
Senior Member
Join Date: Jul 2015
Location: SouthWest Michigan
Posts: 363
|
Re: how to remove front hub inner bearing seal?
Probably really don't need to replace it
Just clean it all up and, you should be good seeing that its just something to keep the dust and dirt out of the bearing. Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
01-25-2021, 12:07 AM | #3 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,342
|
Re: how to remove front hub inner bearing seal?
Take out the 4 bolts and it should come right off, unless caked with grease and grime then you may need to pry it off.
__________________
I know the voices aren't real but damn they have some good ideas! |
01-25-2021, 05:12 AM | #4 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
Re: how to remove front hub inner bearing seal?
thanks for the help
kevin |
01-25-2021, 07:22 AM | #5 |
Member
Join Date: Sep 2018
Posts: 88
|
Re: how to remove front hub inner bearing seal?
Clean of all the excess grease adnd dirt , then pry it off with a screwdriver. ken
|
01-25-2021, 07:25 AM | #6 |
Member
Join Date: Sep 2018
Posts: 88
|
Re: how to remove front hub inner bearing seal?
Sponsored Links (Register now to hide all advertisements)
|
01-25-2021, 11:37 AM | #7 |
Senior Member
Join Date: Nov 2020
Location: Hollister, CA
Posts: 133
|
Re: how to remove front hub inner bearing seal?
If the seal isn't rusted in...
After you pull the drum reinstall the nut on the end of the axle, then place the drum over that so the nut will catch the seal, then give it a good pull. |
01-25-2021, 12:26 PM | #8 | |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: how to remove front hub inner bearing seal?
Quote:
Actually, it's more of a retainer rather than a seal.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
01-25-2021, 12:36 PM | #9 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,754
|
Re: how to remove front hub inner bearing seal?
After reading this thread I think three different parts have been mentioned
and I'm not sure which one the OP was referring to. |
01-25-2021, 05:36 PM | #10 | |
Senior Member
Join Date: Nov 2020
Location: Hollister, CA
Posts: 133
|
Re: how to remove front hub inner bearing seal?
Quote:
What's sad is I just packed the front wheel bearing about a month ago...and I still brain-farted. To age or not to age, that is the question...LOL. |
|
01-25-2021, 07:37 PM | #11 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
Re: how to remove front hub inner bearing seal?
hello
in bob's photos it is the one on the left kevin |
|
|
Sponsored Links (Register now to hide all advertisements) |
|