My New Project! CCPU

[pooch]

Great to see ya back Jake.

Check my album out, it may give you some ideas on what to drop in the pickup bed to go to your swaps in....

I built this since you were here last.

[jakeknapp29]

Well, I have to say I'm a little embarassed. I just realized how long it has been since I posted anything here. I can't believe it has been four years since I started this build. Where has the time gone??? To make a long story short, I got really frustrated with this project and didn't touch it for probably a year and focused on some other projects. I finally built my motivation back up and am ready to finish this thing. Just about ready to finish up the body work and prep for paint. I'm also working on putting the engine back together. I did all my own babbitt pouring and line boring. Here are a few pics to get started back up again. I promise to post more soon.

[rocket1]

Great project,keep that windshield visor,mine is non stock but makes my truck more interesting,the two holes with the clincher nuts on the driver side post are for the mirror bracket.If you can't find one a vendor at the Hellertown A show reproduced them,one of the Barners would be able to put you in contact with him.

[jakeknapp29]

Poured the rod Babbitt and bored them to size

[Pilotdave]

Jake - that's a great project! Thanks for posting all the pictures and the stories - it's fun to watch that truck come together.

Dave

[jakeknapp29]

Sponsored Links (Register now to hide all advertisements)

I'm still working on it! I finished the engine over the summer. Most of my summer was spent doing body work, sanding and priming. I hope to start final painting on the body after the holidays. I got all the chassis components painted and I'm assembling it now. With any luck, I might just have this thing on the road next year!

[jakeknapp29]

Here are a few more

[oldwoodsman]

per·se·ver·ance
ˌpərsəˈvirəns/
noun
noun: perseverance

1. steadfastness in doing something despite difficulty or delay in achieving success.
   "his perseverance with the technique illustrates his single-mindedness"
   synonyms: persistence, tenacity, determination, staying power, indefatigability, steadfastness, purposefulness;
   
   
   
   

Great work Jake. Keep it up

[Great Lakes Greg]

I have always thought it a shame to cover up a well done chassis. That truck is going to be sharp.

[JBill]

I'm in Valparaiso, not too far away, so when you get tired of this project you can drop it off at my house!! Just kidding. Enjoy. Looks to be in good shape.

[jakeknapp29]

Thanks for the encouragement, guys! I'll keep posting as I progress

[32 chevy vett]

Just went through your whole post. Very good on all your work that powder coat looks great
I have a friend that just done his 33 street rod frame in powder coat looks great.
I'am at the same point as you on my 30 coupe waiting for the summer so I can paint.
Very good work keep the photos coming.

[jakeknapp29]

Can't wait to set the chassis down on its wheels!

[Art Newland]

wow! great job.

[jm29henry]

Good luck enjoy the process

[waxhead]

outstanding work, keep it up.

[jakeknapp29]

I set the engine in the chassis today. Starting to look a little bit like a Model A!

[jakeknapp29]

It runs! Fired it up for the first time today and ran quite well.

[Gunmetal blue2]

do you have any of the aa parts you don't want e-mail me [email protected] or 574-221-1475. good luck and welcome. I have a 1929 AA ccpu

[rogerbridges01]

Hi like your build .I could you measure the cab corner where it has the place like it was going to have window ? I think it is 5 by 18 I am biulding one from the ground up buy hand from flat stock . [email protected] . Thank's .