|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-17-2020, 11:58 AM | #1 |
Senior Member
Join Date: Jan 2016
Posts: 2,096
|
1926 4 door phaeton front bumper brackets and bumper
Does anyone have a photo or diagram of how the front bumper brackets are installed on the frame, and then on the bumper?
These are the parts that I have. |
06-24-2020, 07:54 AM | #2 |
Senior Member
Join Date: Jan 2016
Posts: 2,096
|
Re: 1926 4 door phaeton front bumper brackets and bumper
Do the bumper, brackets and parts look correct for a 26 phaeton?
|
Sponsored Links (Register now to hide all advertisements) |
|
06-24-2020, 08:35 AM | #3 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: 1926 4 door phaeton front bumper brackets and bumper
No on the diagram or instructions. The bumper shown is aftermarket not Ford supplied. I think if it was made for a Model T, it would be for 1925 back and may have used the "L" brackets to mount to the stem on the head lights. Those "L" brackets look homemade to me. Nice for show, but not real strong. If you hold the arm up to the frame, with the hole in the center at about where the fender brace is, do the arms even extend far enough to the front to put the bumper in front of the wheels? Stock, the 21 and 30" wheels will have approx the same diameter add a little more for current oversized tires. If you look at Lang's catalog you will find photos of the 26/27 bumpers and will give you an idea how the arms are shaped.
__________________
I know the voices aren't real but damn they have some good ideas! Last edited by redmodelt; 06-24-2020 at 08:41 AM. |
06-24-2020, 10:17 AM | #4 |
Senior Member
|
Re: 1926 4 door phaeton front bumper brackets and bumper
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|