|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-13-2022, 11:28 PM | #1 |
Senior Member
Join Date: May 2010
Location: midlothian illinois
Posts: 447
|
Speedway Motors; 8ba aluminum heads available...
Speedway Motors currently lists 2 sets of aluminum 8ba heads in their catalog;the Offenhuser heads @ $1,500 and the Edelbrock (65cc ?)
heads @ $840. Is there a specific difference between them, other than the pure esthetics of the name, its location in the castings, and how they would look against each other? I am in need of a set of heads for my 8ba build, have advertised for a pair in the "wanted" section for months and not a single response - and I currently know of no other source for a pair of aluminum heads. Comments, suggestions - I'm open to it all. Thanks, Steve |
04-14-2022, 02:22 AM | #2 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,307
|
Re: Speedway Motors; 8ba aluminum heads available...
If you're going to spend the money Try Navarro's.H&H Flatheads makes them. Just checked and they are out of stock.You might try them anyway as they might be making a new run.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-14-2022, 06:58 AM | #3 |
Senior Member
Join Date: Aug 2017
Location: ohio
Posts: 986
|
Re: Speedway Motors; 8ba aluminum heads available...
I put Offy heads on my last 8BA with a .040 bore & Isky Max 1 cam. I didn't think it ran any better that it did with stock heads. Just me & my .02 cents.
|
04-14-2022, 07:16 AM | #4 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Speedway Motors; 8ba aluminum heads available...
When I see the hi prices of these parts, I remember the time I was at york Pa back in the 80s. I came home with 3 or for sets of alum heads and 4 or 5 2,3 and 4bl intakes, and only spent a few hundred bucks. But I had sold all the books I had with me. My wife was very happy.
Gramps |
04-14-2022, 08:39 AM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,950
|
Re: Speedway Motors; 8ba aluminum heads available...
In 1963 I bought a good used pair of OFFY 8BA heads for $5 that also included a Weber alum flywheel and a 4 x2 intake. Those were the days.
|
04-14-2022, 09:08 AM | #6 |
Senior Member
Join Date: Jan 2011
Posts: 162
|
Re: Speedway Motors; 8ba aluminum heads available...
Sponsored Links (Register now to hide all advertisements)
They are thick and workmanship looks great. You need special studs for them. In my Offy´s chamber cc´s where mismatched.... |
04-14-2022, 09:22 AM | #7 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,320
|
Re: Speedway Motors; 8ba aluminum heads available...
As advised on the H.A.M.B., check by phone with the suppliers. I'll bet they're ALL out. The possible exception might be for Offenhausers (which explains the huge disparity in price).
Bottom line? Get the Edelbrocks if you can because of price and spark plug fitment. I even checked Amazon. They are "Temporarily Unavailable" except for what appears to be a single drivers side head. For it (or a pair when they become available), the price is now $953. Last edited by tubman; 04-14-2022 at 10:19 AM. Reason: More information |
04-14-2022, 09:25 AM | #8 |
Senior Member
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,062
|
Re: Speedway Motors; 8ba aluminum heads available...
Silver paint and a Mill Job. $1500 buys a lot of Gas
|
04-14-2022, 09:31 AM | #9 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: Speedway Motors; 8ba aluminum heads available...
Anybody interested in a set of aluminum 8BA Canadian heads ? One NOS the other
very close to NOS, just to nice to use on my '32 beater p/u. Charlie ny |
04-14-2022, 09:57 AM | #10 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Speedway Motors; 8ba aluminum heads available...
My friend has a set of Edelbrocks on back order from Speedway for 1 1/2 years now. No delivery date.
|
04-14-2022, 10:34 AM | #11 |
Senior Member
Join Date: May 2010
Posts: 4,489
|
Re: Speedway Motors; 8ba aluminum heads available...
I have a set of Offenhauser 59AB heads for my current project. I have been an Offenhauser dealer for many years but with their change in management and production problems they are no longer the company they were when the family ran it. I will have the machine shop check them for mismatched combustion chambers and for proper clearance.
|
04-14-2022, 10:54 AM | #12 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,320
|
Re: Speedway Motors; 8ba aluminum heads available...
I wonder how many sets of 8BA aftermarket heads are currently on backorder?
Sounds like an opportunity for our Chinese friends to me. |
04-14-2022, 11:58 AM | #13 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: Speedway Motors; 8ba aluminum heads available...
Yup…. Mill a set of EAB’s and buy a can of high- temp silver barbecue grill paint….. Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
04-14-2022, 01:49 PM | #14 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,181
|
Re: Speedway Motors; 8ba aluminum heads available...
I have two nice pairs of uncut EAB heads if anyone is looking.
|
04-14-2022, 04:37 PM | #15 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,070
|
Re: Speedway Motors; 8ba aluminum heads available...
I'd try to run Edelbrocks - supposedly they're getting their flathead heads back in production. I waited a LONG time for a set of 59AB ones (like 1.5 years).
I'd give Summit a call and see if they actually believe their quoted ship date on these and I'd have them validate it with Edelbrock itself. Summit is showing a June ship date (if ordered today). https://www.summitracing.com/parts/edl-1115 $833.50 Last edited by Bored&Stroked; 04-15-2022 at 09:34 AM. |
04-14-2022, 08:25 PM | #16 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Speedway Motors; 8ba aluminum heads available...
If they hold that price, that's a hell of a deal compared to the Offenhausers. Relatively speaking.
|
04-15-2022, 07:14 AM | #17 |
Senior Member
Join Date: Aug 2017
Location: ohio
Posts: 986
|
Re: Speedway Motors; 8ba aluminum heads available...
Flatford8 has the right idea.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|