1946-48 factory open drive banjo rear - what seal #

[steve hackel]

Hello : i have a 46-48 factory open drive banjo rear end that needed

some attention so I figured I would just rebuild it and get it out of the
way. Removing the pinion and frond housing was no issue, removing

the factory seal was nearly impossible ... I had to destroy it in order to
get it out of its resting place Does anyone have a replacement seal
number that I can order from or cross reference it to something newer?
I have not been able to find the right section in any of the dealer catalogs that might have it listed - or just simply stupid Thanks, Steve

[deuce lover]

Try C&G in Escondido,CA.
https://www.google.com/url?sa=t&rct=...AW5WR3-7SxG2L7


Some good answers here.
https://www.google.com/url?sa=t&rct=...WQ5j8qOX8iQk91

[jayvee34]

Speedway Motors sold the open dive shaft conversion, and could have the seal you are
looking for. Their phone # 800.979.0122

[steve hackel]

Speedways open drive is different than the factory style, and I have one of them
to compare and they are not the same.

I sent a message to C&G but they have not responded to my question.....
The link from Google only relates to the heavier Ford axles and not the standard

banjo size rear ends.

Still looking for an answer. Thanks

[V8COOPMAN]

Originally Posted by steve hackel

Speedways open drive is different than the factory style, and I have one of them
to compare and they are not the same.

I sent a message to C&G but they have not responded to my question.....
The link from Google only relates to the heavier Ford axles and not the standard

banjo size rear ends.

Still looking for an answer. Thanks

Steve ....That "01Y-4676" has to be correct if it fits the '42-'47 1/2-ton pick-up. Click BELOW for C&G link to the seal!


https://cgfordparts.com/pinion-seal-...-01y-4676.html

.

[deuce lover]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by steve hackel

Speedways open drive is different than the factory style, and I have one of them
to compare and they are not the same.

I sent a message to C&G but they have not responded to my question.....
The link from Google only relates to the heavier Ford axles and not the standard

banjo size rear ends.

Still looking for an answer. Thanks

Call C&G.They are good people and you can talk to a knowledgeable person.They even returned a call to me in France for a question for an order I wanted to place.

[barnfind08]

I have those 6.00

[Karl Wolf]

If you can get micrometer measurements, housing i.d.,
shaft o.d., seal thickness, there is such a thing as a size chart.
I have an old one- National seals... it was old a long time ago...
Still works.

Karl

[Automotive Stud]

National 5778 should be available locally, or Napa 15788