The Ford Barn

LASAR · 05-17-2023, 12:54 PM

Is there a special puller to remove the harmonic balancer on a '57 TBird 312? Or ideas on how to get it off. Thanks

miker98038 · 05-17-2023, 01:02 PM

Old post and picture, from Casco at the time.

dmsfrr · 05-17-2023, 03:36 PM

Yes, they work very nicely.

LASAR · 05-17-2023, 04:48 PM

Thanks.
Looks like Casco has it. Wish it was still the same price.

cos · 05-17-2023, 07:30 PM

Sponsored Links (Register now to hide all advertisements)

Hello You can get by with something home made. Been a while but made one. Thinking I used a 1/2 x 1 1/4 (what ever will fit in the rectangle slots) flat bar a little wider than rectangle slot. bore a hole in middle, tap treads and made a pressure screw. Take washer off crank end bolt, put bolt back in for pressure screw to jack from.

05-17-2023, 12:54 PM	#1
LASAR Junior Member Join Date: May 2014 Location: Arlington, Tx Posts: 2	57 TBIRD Harmonic Balancer Is there a special puller to remove the harmonic balancer on a '57 TBird 312? Or ideas on how to get it off. Thanks

05-17-2023, 04:48 PM	#4
LASAR Junior Member Join Date: May 2014 Location: Arlington, Tx Posts: 2	Re: 57 TBIRD Harmonic Balancer Thanks. Looks like Casco has it. Wish it was still the same price.

05-17-2023, 07:30 PM	#5
cos Junior Member Join Date: Sep 2022 Posts: 16	Re: 57 TBIRD Harmonic Balancer Sponsored Links (Register now to hide all advertisements) Hello You can get by with something home made. Been a while but made one. Thinking I used a 1/2 x 1 1/4 (what ever will fit in the rectangle slots) flat bar a little wider than rectangle slot. bore a hole in middle, tap treads and made a pressure screw. Take washer off crank end bolt, put bolt back in for pressure screw to jack from.