The Ford Barn

Gick70 · 12-12-2020, 09:14 PM

Door sag,anybody have any luck with a certain fix,drill for bigger bushings and pins,or hinge replacement?

alanwoodieman · 12-12-2020, 10:36 PM

are the pins loose in the hinge? if so drill for larger pins, if not place a piece of wood between lower hinges and gently close the door and push on it, usually raises the rear of the door to free it up

marko39 · 12-13-2020, 09:53 AM

Sponsored Links (Register now to hide all advertisements)

After replacing the body rubber shims on my 39 Tudor, both doors had a sag to them. They fit fine before. I removed the shim at the B pillar and that brought the doors up about 1/4" which is much better.

12-12-2020, 09:14 PM	#1
Gick70 Senior Member Join Date: Aug 2017 Posts: 107	1952 ford f1,door sag Door sag,anybody have any luck with a certain fix,drill for bigger bushings and pins,or hinge replacement?

12-12-2020, 10:36 PM	#2
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: 1952 ford f1,door sag are the pins loose in the hinge? if so drill for larger pins, if not place a piece of wood between lower hinges and gently close the door and push on it, usually raises the rear of the door to free it up

12-13-2020, 09:53 AM	#3
marko39 Senior Member Join Date: Oct 2016 Location: harpursville ny Posts: 1,040	Re: 1952 ford f1,door sag Sponsored Links (Register now to hide all advertisements) After replacing the body rubber shims on my 39 Tudor, both doors had a sag to them. They fit fine before. I removed the shim at the B pillar and that brought the doors up about 1/4" which is much better.