|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-16-2016, 07:23 PM | #1 |
Junior Member
Join Date: Nov 2014
Location: Cambridge, ONT
Posts: 15
|
Wood Assembly Sequence Questions
Working on my first restoration - a 29 Leatherback. Front posts and header were pretty much dust coming apart. Looking for pointers on assembly sequence and tips for getting the cowl back on with correct dimensions when reinstalling window and steel trim.
|
01-17-2016, 09:24 AM | #2 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Wood Assembly Sequence Questions
I did this job on my 30 Town Sedan. Go to my albums, My A, and there are lots of pics of my wood in various stages of manufacture. Click on my picture to get to my profile. Hope this helps!
Terry |
Sponsored Links (Register now to hide all advertisements) |
|
01-17-2016, 09:37 AM | #3 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: Wood Assembly Sequence Questions
Sponsored Links (Register now to hide all advertisements)
|
01-17-2016, 03:26 PM | #4 |
Junior Member
Join Date: Nov 2014
Location: Cambridge, ONT
Posts: 15
|
Re: Wood Assembly Sequence Questions
Thanks Terry. Some great photos there that will be very helpful!
Where I'm stuck today is figuring how I will reinstall the cowl (before I screw it all together and glue). Did you have to replace your front pillars? I'm not sure if I should straighten the tabs on one side of the cowl that wrap around the pillars, so I can slide it on from the front... |
|
|
Sponsored Links (Register now to hide all advertisements) |
|