Late 1932 driveshaft & torque tube needed

[kill bill]

Sponsored Links (Register now to hide all advertisements)

Late 1932 Scalloped torque tube and driveshaft needed.
Note: please see attached
The round-flange 'B' torque tube is 54.87" and the companion drive shaft is 58.56" (+/-.01) in both cases. These are the dimensions shown on the original engineering drawing for the B-4000 rear axle assembly. Those for the late 18-4000-B straddle-mounted pinion axle released in late September, 1932 (used on both fours and V-8s) were 54.89" and 52.32" respectively.