|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-28-2020, 09:11 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Montgomery, Al.
Posts: 640
|
Two tooth setting in a 28/29
Can a 2 tooth steering box be used in a 28/29 A Model with out modeification? I know the shaft will have to resized if this would be ok to do.
|
11-28-2020, 10:56 PM | #2 |
Senior Member
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 1,279
|
Re: Two tooth setting in a 28/29
The two tooth Gemmer steering sector was used interchangeably from Feb. 1929 along with the 7 tooth sector to the end of 1929. It was 1 inch shorter than the 30-31 steering column. For 1929, the steering shaft for the two tooth Gemmer sector was 43" long. the 30-31 steering was 44" long.
So yes, the two tooth sector can be used without modification if it is the shorter 29 version. |
Sponsored Links (Register now to hide all advertisements) |
|
11-28-2020, 11:45 PM | #3 |
Senior Member
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,045
|
Re: Two tooth setting in a 28/29
Was there an early versus a later version of the Gemmer box?
|
11-29-2020, 07:31 AM | #4 |
Senior Member
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 1,279
|
Re: Two tooth setting in a 28/29
From the JS& RG. The 1929 two tooth Gemmer column was an inch shorter than the 30-31 steering column.
|
11-29-2020, 09:35 AM | #5 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 189
|
Re: Two tooth setting in a 28/29
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|