06-02-2018, 02:20 PM | #1 |
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Machine Videos
There are some Machine Videos of this machine Shop doing a Model A, or B, Ford.
Comments Please! https://www.youtube.com/watch?v=rDD78ADKP_w |
06-02-2018, 02:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,233
|
Re: Machine Videos
Crank grinding one was revitting.
Saw a recent build and owner ordered a second right away. Said it ran like a Swiss watch. However, when towed on a dolly in gear the first engine took out #1 cylinder. |
Sponsored Links (Register now to hide all advertisements) |
|
06-02-2018, 03:33 PM | #3 |
Senior Member
Join Date: May 2010
Location: Dallas TX
Posts: 112
|
Re: Machine Videos
Where is the head and block resurfacer. Where is the boring bar, who chases a cylinder bore on mill. Needs sleeve and valve seat installed. Forget about boring oversize, let's just hone it dry, it cuts faster. We dont own a cylinder honing machine, or boring bar. It's a blue printed "race block". I'm sure I saw a positive pressure clean room for assembly, didn't you? You saw in on the Internet, it must be true.
__________________
Remember when flying low inverted, down is up, and up can be expensive. |
06-02-2018, 04:58 PM | #4 |
BANNED
Join Date: Sep 2017
Posts: 385
|
Re: Machine Videos
Better off using a file !!
|
06-02-2018, 06:20 PM | #5 |
Member
Join Date: Aug 2014
Location: Grand Rapids MI
Posts: 45
|
Re: Machine Videos
Bet they used the scale to tram the head in as well, before they put their last good insert in that bear claw. Actually don't think there was one good insert in that thing.....
|
06-02-2018, 11:17 PM | #6 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,233
|
Re: Machine Videos
Sponsored Links (Register now to hide all advertisements)
|
06-03-2018, 01:53 PM | #7 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,405
|
Re: Machine Videos
Mickey Mouse was a piker compared to those guys.
|
06-03-2018, 03:46 PM | #8 |
Senior Member
Join Date: May 2010
Posts: 2,592
|
Re: Machine Videos
...
Last edited by Benson; 06-03-2018 at 06:41 PM. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|