|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-10-2014, 02:41 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 1,642
|
1933-34 Reproduction Fender info needed
Posting for a friend who may be interested in going the reproduction steel route rather than with the poor originals he has.
There seems to be many places selling these, and mostly wondering how many different manufacturers there actually are, and how they compare quality-wise, i.e. how much work they usually require. Any information, recommendations, experiences, etc. etc. would be greatly appreciated. Thanks. |
01-12-2014, 11:34 AM | #2 |
Senior Member
Join Date: May 2010
Posts: 1,642
|
Re: 1933-34 Reproduction Fender info needed
Bumping up. Anybody any knowledge or experience with these?
|
Sponsored Links (Register now to hide all advertisements) |
|
01-12-2014, 12:44 PM | #3 |
Senior Member
Join Date: May 2010
Location: Kaufman, TX
Posts: 822
|
Re: 1933-34 Reproduction Fender info needed
My 34 roadster shown in avatar had fenders purchased
from Funk Fenders back in 95-96. Don't know if they are still around or not. I purchased a front fender from Howells out of Beamont Tx and it Appears to be the same. The only issue I see is the apron behind the front wheel is not vertical like the original and the bolt holes for running board are not punched out. |
01-12-2014, 12:51 PM | #4 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,305
|
Re: 1933-34 Reproduction Fender info needed
Contact Bobby Walden @ Walden Speed in Pomona,CA.He installed a set of the repos on a 34 3W coupe a few yrs ago.
|
01-13-2014, 12:45 PM | #5 |
Senior Member
Join Date: May 2010
Location: Massachusetts
Posts: 117
|
Re: 1933-34 Reproduction Fender info needed
Sponsored Links (Register now to hide all advertisements)
Also known as Real Steel. He used to carry fenders and if he doesn't, he can certainly give you advice. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|