|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-18-2021, 10:38 PM | #1 |
Member
Join Date: Jul 2021
Posts: 77
|
Master cylinder
Anyone have a picture of a 1826 ford master cylinder?
Thanks Jerry |
08-18-2021, 11:18 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Master cylinder
No because, unless it is a stock T that has been upgraded to disk brakes, Ts didn't have a master cylinder. Your roadster pu has been modified so, yours could be one of many different master cylinders used depending on the brake system.
__________________
I know the voices aren't real but damn they have some good ideas! |
Sponsored Links (Register now to hide all advertisements) |
|
08-19-2021, 12:28 AM | #3 |
Member
Join Date: Jul 2021
Posts: 77
|
Re: Master cylinder
So the truck didn’t have a master cylinder on the firewall?
Thanks Jerry |
08-19-2021, 02:51 AM | #4 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: Master cylinder
No it did not. He explained it very well!
|
08-20-2021, 11:12 AM | #5 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,422
|
Re: Master cylinder
Ford had specific part numbers for master cylinders beginning in 1939 when they first started using them. The base number for a Ford master cylinder 2140 but the numeric or alpha numberic prefix will tell what it was designed to fit. The only reference to 1826 I can find is the 11-1826 that fits a VW rabbit.
Your vehicle has so much non stock stuff on it that you will be chasing stuff like this for a long time. The mix with Japanese design (and possibly German) parts is not going to help much. Don't assume that the car has Ford parts on it when it has a Nissan/Datsun powerplant. |
08-24-2021, 06:37 PM | #6 |
Junior Member
Join Date: Nov 2010
Posts: 17
|
Re: Master cylinder
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|