|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-18-2024, 08:26 AM | #1 |
Senior Member
Join Date: May 2022
Location: Lakeland Florida
Posts: 377
|
1938 Clock Light Wire Routing
Can anyone shed light on how the clock light wire passes through the glovebox for 1938?
As always, thank you in advance! Steve |
02-18-2024, 10:28 AM | #2 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 949
|
Re: 1938 Clock Light Wire Routing
I haven't seen how a '38 wire enters the glovebox, but for the '40 models the wire came in from the bottom of the lower left front of the glovebox through a brass grommet. I thought they might have done the same for the '38 models. I know the clock is different from the '40, but they both are in the center of the glovebox door. As I recall, a portion of the wire is exposed inside the glovebox from the clock until it exits through the grommet.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-18-2024, 05:15 PM | #3 |
Senior Member
Join Date: Jan 2015
Posts: 326
|
Re: 1938 Clock Light Wire Routing
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|